Device Privacy Code; Sound Profiles - UTStarcom SideKick 3 Reference Manual

Device Privacy Code

If you want to secure your device from unauthorized access once your device has
gone into key guard mode, you will first need to set up a privacy code:
Press
1
Settings > Key Guard & Security.
Scroll down to the Privacy Lock group box. Highlight
2
then press the trackball to select it.
Enter a three-digit code using the keyboard or the dial:
3
At the prompt, re-enter your code to verify.
4 A "New Combination Enabled" message appears. Select OK.
5 Press
You can still make emergency calls from the key guard screen even if privacy code
Note
is enabled by opening the display then pressing

Sound Profiles

To create a new sound profile or modify an existing profile, press
and select Settings > Sound Profiles. You can have up to eight profiles total.
MENU
The system provides six profiles by default.
to open the Jump screen. Press
JUMP
to save your settings and return to the Jump screen.
DONE
then select
MENU
+ .
MENU JUMP
JUMP
Setting Up Your Device
,
, then press
27