Emc Testing; Guidance And Manufacturer's Declaration - Electromagnetic Emissions - CAIRE Eclipse 5 User Manual

EMC Testing

Medical equipment needs special precautions regarding EMC and needs to be installed and put into ser-
vice according to the EMC information provided in this section.
Guidance and Manufacturer's Declaration —Electromagnetic Emissions
The Eclipse 5 is intended for use in the electromagnetic environment specified below. The customer or the user
of the Eclipse 5 should assure that it is used in such an environment.
Emissions Test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
WARNING: THE DEVICE SHOULD NOT BE USED ADJACENT TO OR STACKED WITH OTHER
EQUIPMENT. IF ADJACENT OR STACKED USE IS NECESSARY, THE DEVICE SHOULD BE OB-
SERVED TO VERIFY NORMAL OPERATION IN THE CONFIGURATION IN WHICH IT WILL BE USED.
WARNING: THE USE OF ACCESSORIES OTHER THAN THOSE SPECIFIED FOR THE DEVICE IS NOT
RECOMMENDED. THEY MAY RESULT IN INCREASED EMISSIONS OR DECREASED IMMUNITY OF THE
DEVICE.
Compliance Electromagnetic Environment - Guidance
The device uses RF energy only for its internal function. There-
Group 1 fore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Class B
The device is suitable for use in all establishments, including
domestic establishments and those directly connected to the
Class A
public low-voltage power supply network that supplies build-
ings used for domestic purposes.
Complies
Eclipse 5
PN 21182453-C4 E | User Manual 25 - ENG