Table of Contents
Advertisement
Applying Saved Image Shape Settings
You can load the image shape settings you selected and saved to the projector's memory and apply
them to the current image.
1. Turn on the projector and display an image.
2. Hold down the Num button on the remote control and press the number button (1, 2, or 3) that
matches the number of the saved image shape setting.
The saved image shape setting is applied and you are prompted to calibrate the screen.
3. Follow the on-screen instructions to calibrate the screen.
Parent topic:
Resizing the Image with the Wide and Tele Buttons
You can resize the image using the Wide and Tele buttons. Wait at least 30 minutes after you start
projecting to adjust the image size.
1. Turn on the projector and display an image.
2. To enlarge the image size, press the W (Wide) button on the projector's control panel.
Image Shape
124
Advertisement
Table of Contents
