Table of Contents
Advertisement
Note: If you turned on the Auto Source Search setting in the Operation menu, the projector
automatically switches to another detected image source if the signal to the current image source is lost.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Do one of the following:
• Press the Source Search button on the projector or remote control until you see the image from
the source you want.
• Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to cycle through the sources.
1
HDMI, Video, and HDBaseT (BrightLink 1485Fi+) sources
2
VGA port sources
3
USB port sources (computer display or external devices)
4
Network and Screen Mirroring sources
132
Advertisement
Table of Contents
