Network Menu
Authentication
You can set the security for your projector to use during Web API
communications.
Open
Security is not set.
Digest
Communication is performed using API authentication (Digest
authentication).
See the Web API Specifications for Projectors for details.
a
Priority Gateway
Network > Network Configuration > Others > Priority Gateway
s
You can set the priority gateway.
PJLink
Network > Network Configuration > Others > PJLink
s
Set to On to monitor the projector using PJLink.
AMX Device Discovery
Network > Network Configuration > Others > AMX Device Discovery
s
Set to On when you want to allow the projector to be detected by AMX
Device Discovery.
Crestron Connected
Network > Network Configuration > Others > Crestron Connected
s
Set to On only when monitoring or controlling the projector over the network
using Crestron Connected.
Restart the projector to enable your changes.
Enabling Crestron Connected disables the Epson Message Broadcasting
feature in the Epson Projector Management software.
a
Art-Net
Network > Network Configuration > Others > Art-Net
s
Set to On when you want to control the projector using Art-Net.
Net
Enter a number for the projector's Net using 0 to 127 (default is 0).
Sub-Net
Enter a number for the projector's Sub-Net using 0 to 15 (default is 0).
Universe
Enter a number for the projector's Universe using 0 to 15 (default is 0).
Start Channel
Enter the start channel that handles Art-Net using 1 to 495 (default is 1).
Channel Information
You can view the channel information.
Message Broadcasting
Network > Network Configuration > Others > Message Broadcasting
s
Set to On to receive the message delivered by Epson Projector Management.
See the Epson Projector Management Operation Guide for details.
115