Table of Contents
Advertisement
DoorScan
Accessories
Functional Safety Data
Characteristic
Safety integrity level
Performance level (at 40°C)
Category
MTTF
d
Life time (T
)
M
Accessories
Weather protection covers
For protection against the effects of weather (can be cut to required lengths)
DoorScan Weather Cap L1200
DoorScan Weather Cap L1600
End cap sets
DoorScan End Caps
Additional sensor modules
for individual configuration
DoorScan-I
DoorScan-R
DoorScan-T
Connection
DoorScan Connection Cable 5p Double-ended cordset for module ribbon cable with five plug-in
DoorScan Transfer Loop
DoorScan Cable BS/BGS
DoorScan Adapter
Expansion
DoorScan Profile L3000 5pcs
DoorScan Cover L3000 5pcs
DoorScan Interface Set
Device Versions
The module interface, emitter, and receiver may be provided in different versions. These versions are
known as device versions and are specified on the type label. Different device versions can be com-
bined with one another. If receivers with different device versions are used in combination, all receivers
perform the functions of the lowest device version. The same rule applies to the emitter modules.
Certain functions are available only from a particular device version. If the requirements for the device
version are higher than V.01, these function requirements are specified for the corresponding modules.
Functions without a specified device version apply to all modules from V.01 onward.
Classification
SIL 2
PL d
Cat. 2
112.7 a
10 a
Weather protection cover, length 1200 mm
Weather protection cover, length 1600 mm
Standard end cap set (left/right)
Interface module
Receiver module
Emitter module
connections
Door transition cable to door controller
Double-ended cordset for transition from door hinge side to hinge
opposite side
Adapter for connecting cables, e.g., to glass doors, existing cables
Aluminum profile
Cover/profile cover for aluminum profile
Expansion set for installation on glass doors
5
Advertisement
Table of Contents
