1.12.3 OCHNC Circuits Creation Failure
Figure 1-29
1.12.3.2 Conditions for OCHNC Circuit Creation Failure
If the OCHNC circuit creation fails, you will see one of the following conditions:
•
Cisco ONS 15454 DWDM Troubleshooting Guide, R7.0.1
1-80
OCHNC Circuit Successfully Completed
If the WPP wizard cannot complete the circuit creation procedure, CTC displays the error message
shown in
Figure
1-30. In the message, click Details to see the partial connections that WPP can set
up. Start troubleshooting the problem in the first node that is unreachable along the path.
Chapter 1 General Troubleshooting
78-17742-02