Supplying Power To The Pa966; Charging The Main And Backup Batteries For The First Time - Unitech PA966 Product Reference Manual

3.Position the battery pack and install the battery
compartment door.

Supplying Power to the PA966

Connect the RS232/Charging Cable or USB/
Charging Cable to the PA966, and then
connect the AC adapter to the cable's power
jack and an electrical outlet.
Or place the PA966 into the Docking Station
(first connect the power supply to the Docking
Station).

Charging the Main and Backup Batteries for the First Time

It may take up to 16 hours to fully charge the empty backup battery. The first time charge should
be at least 16 hours to ensure a proper charge.
CAUTION: Operating the PA966 for the first time without the AC adapter, and without fully
charging the backup battery may result in loss of data stored in RAM memory.
Product Reference Guide
9