Charging The Main And Backup Batteries For The First Time; Supplying Power To The Pa970 - Unitech PA970 User Manual

PA970 User's Manual

Charging the Main and Backup Batteries for the First Time

IMPORTANT!
After insuring that the Backup Battery Switch is indeed in the ON position, follow the steps below to
charge your PA970's batteries. Please note that the first time charge of the PA970 might take up to
16 hours.

Supplying Power to the PA970

Connect the RS232/Charging Cable or USB/Charging Cable
between the PA970 and your PC, and then connect the AC
adapter between the cable's power jack and an electrical
outlet.
Or place the PA970 into the Docking Station, after connecting
the power supply between an electrical outlet and the Docking
Station.
Before charging the PA970's batteries for the first time, refer to page 13
in this manual or page 1 of the QuickStart Guide. This PA970 arrives
from the factory with its Backup Battery Switch in the OFF position. In
order to charge and activate the Backup Battery, its switch must be in
the ON position. Otherwise data can be lost if the Main Battery shuts
down or is removed.
5