Danfoss 088U0200 Manual page 9

Instruction CF-MC Master Controller
5.3 Input for Global Standby
• Connect the two wires from an external switch (ON/OFF) to the two
terminals for the Global Standby input. ( g. 13)
When this switch is closed (ON) the system will override the current
set point for all the room thermostats and change it to 8°C
• Fix the cable. ( g. 14)
Note: The Global Standby ensures a set room temperature xed at 8°C for
all Room Thermostats, but it can be changed with the Remote Controller,
CF-RC.
VI.UH.K1.52
Produced by Danfoss Floor Heating Hydronics 08.2005
9