Advertisement
Available languages
Available languages
Instruction CF-MC Master Controller
5.5 Wiring
Input
Global Standby
Heating/Cooling
External
Antenna
5.6 Power Supply
• When all actuators, pump and boiler controls and other inputs are
installed, connect the Master Controller's power supply plug to a 230V
power supply. ( g. 18)
Note: If the power supply plug is removed from the power supply cable
during installation make sure that the connection is made according to
existing law/legislation.
VI.UH.K1.52
Relays
1
2
L N L N
Produced by Danfoss Floor Heating Hydronics 08.2005
Actuator outputs
3
4
5
6
7
8
9
10
11
Advertisement
Chapters
