Panduit TDP43ME Manual page 54

TDP43ME: PA26305A01_08
TDP43ME
In the CUSTOM COMMANDS window,
click on the END down arrow and drag
the mouse down to TEXT and release.
Click on the ellipsis (three dots) button,
the following window will pop up.
In this window, type
"^XSET,USBETHERNET,1" followed
by a RETURN.
Type it exactly like this command, with
uppercase letters, no spaces, no
quotation marks, etc. "^" is the shift 6
button.
After the RETURN key, click OK. This
action sets the printer to switch the
relay in the printer to Ethernet active
once the next print job has been sent.
Click APPLY and then OK and this
window will disappear.
Page 54 of 75 11-2022