Answering System Troubleshooting Chart - Uniden XCAI680 User Manual

Answering System Troubleshooting Chart

Problem
Answering System does not work.
Answering System does not answer calls.
Messages are incomplete.
No sound on the Base Unit speaker during call monitoring or
message playback.
Cannot access remote call-in features from another touch-tone
phone.
Suggestion
Make sure that the Base Unit is plugged in.
Make sure the Answering System is turned on.
Press the RESET button to reset the system after an AC line
spike.
Set the REC TIME/ANN/4/1 switch in either the 4-minute or
1-minute position.
The memory may be full. Delete some or all of the saved
messages.
The incoming messages may be too long. Remind callers to
leave a brief message.
The memory may be full. Delete some or all of the saved
messages.
Adjust the volume control on the Base Unit.
Make sure you're using the correct PIN number.
Make sure that the touch-tone phone you're using can
transmit the tone for at least two seconds. If it cannot, you
may have to change to another phone.
56