Selecting A Preset Ogm - Uniden XCAI680 User Manual

Note: If the REC TIME/ANN/4/1 switch is in the "Announce Only" position, the Message Counter
LED displays an A when the system is in Standby.
Recording Your Personal OGM
1. To record an outgoing message, press and hold
ogm .
Start recording your message after you hear the
long tone and the Message Counter LED begins to
count up.
2. Do not get closer than twelve inches to the
microphone, and speak clearly while recording your
message. When you are finished recording, release
ogm .
You will hear a tone, and your message will play on
the Base Unit speaker.
Note: You can leave up to a 60-second outgoing
message.

Selecting a Preset OGM

After you have recorded an outgoing message, you can set your Answering System to play either a
preset message or your outgoing message.
1. Press ogm .
Your recorded outgoing message will begin to play.
2. While your recorded outgoing message is playing, press ogm again.
44