Using Your Phone; Making And Receiving Calls; Changing Channels, Flash, And Page/Find - Uniden XC815 Owner's Manual

Making and Receiving Calls

The following features of the XC800 Series
phones are different depending on the handset's
location when you make or receive a call.
Handset On Base
Pick up handset
Answer Call
(AutoTalk).
1) Pick up handset.
T
2) Press .
Make Call
3) Listen for dial tone.
4) Dial the number.
Return handset to base
Hang up,
(AutoStandby).
1) Pick up handset.
T
2) Press .
Redial,
3) Listen for dial tone.
F
4) Press .
Note: Sometimes when you press
the phone, you may get an error tone and the
phone will not disconnect. If this happens, place
the handset on the base or press
holding the handset close to the base.

Using Your Phone

Handset Off Base
T
Press .
T
1) Press .
2) Listen for dial tone.
3) Dial the number.
T
Press .
T
1) Press .
2) Listen for dial tone.
F
3) Press .
T
to hang up
T
again while
9
Changing Channels, Flash, and
Page/Find
To change channels or access call waiting while
the phone is in use, or to use the one-way page to
locate the handset, follow these steps:
Press These Keys
C
Press
Note: Change
Changing
channels to help
Channels
eliminate background
noise.
If the call waiting tone
FLASH
sounds, press
accept the waiting call.
Press page/find on the
Page/Find
base to locate the
handset.
You Will Hear
A click similar to when
.
C
is pressed. There
may be a brief pause as
your phone searches for
a clear channel.
A click, a short pause,
F
then the caller (if you
to
were on a call).
The handset beeps
about 15 times.