Programming Your Phone; Storing A Number In Memory; Storing A Mixed Number; Dialing A Stored Number - Uniden XC815 Owner's Manual

All programming functions must be completed
when your phone is in the standby mode because
programming keys do not function while you are
on the phone.

Storing a Number in Memory

Use these keys to store a number in memory.
Note: An error tone will sound and the
programming procedure will be canceled if more
than 20 seconds elapse between each keystroke
entry or step.
1. Remove the handset from the base.
M
2. Press .
The talk/batt low LED blinks.
3. Enter the number you want
to store (up to 16 digits).
5551212
4. If a pause is needed during dialing to access a
long distance service, press
P
Note: The button counts as one digit.
P
Pressing more than once increases the
length of the pause between numbers.
M
5. Press again.
6. Enter the memory location (0-9).
A tone indicates that the number is stored.

Storing a Mixed Number

If your phone is set up for pulse dialing, you can
store a mixed mode number so that you can easily
access long distance services.
Use these keys to store a mixed mode number
in memory.
Note: An error tone will sound and the
programming procedure will be canceled if more
than 20 seconds elapse between each keystroke
entry or step.
1. Remove handset from the base.
M
2. Press .
The talk/batt low LED blinks.
3. Enter the number to be dialed in pulse mode.
555 1212
4. Press on the handset.

Programming Your Phone

P
.
9P555
1212
5. Enter the number to be dialed in tone mode.
6. If a pause is needed during dialing to access a
long distance service, press
P
Note: The button counts as one digit.
P
Pressing more than once increases the
length of the pause between numbers.
M
7. Press again.
8. Enter the memory location (0-9).
A tone indicates that the number is stored.

Dialing a Stored Number

To dial a number previously stored in memory,
follow these steps:
1. Remove the handset from the base.
T
2. Press .
M
3. Press .
4. Press the memory location number (0-9).

Chain Dialing

On certain occasions, after dialing a number, you
may be requested by the party or service you are
calling to enter a special access code, such as
when performing a banking transaction. To do
this, follow these steps:
1. Store the access code into one of the
memory numbers.
2. Dial the main number.
3. At the appropriate time, press
the memory location number where the access
code is saved.

Erasing a Stored Number

To erase a number previously stored in a memory
location (0-9), follow these steps:
1. Remove the handset from the base.
M
2. Press twice.
3. Press the memory location number (0-9).
Note: An error tone will sound and the erase
procedure will be canceled if more than 20 seconds
elapse between each keystroke entry or step.
10
3300
P
.
P3300
M
followed by