Toyota FORTUNER 2021 Owner's Manual

Table of Contents

Quick Links

Table of Contents

Need help?

Do you have a question about the FORTUNER 2021 and is the answer not in the manual?

Questions and answers

John Arendze

August 2, 2025

The buzzer is not working on ghe back door

Сергей

March 16, 2025

Как разобрать верхний бардачок на тойоте фортунер

Summary of Contents for Toyota FORTUNER 2021

Page 3 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
Page 4: Table Of Contents
Riding with children....51 Steering wheel ....149 Child restraint systems ..52 Inside rear view mirror..151 1-3. Emergency assistance Outside rear view Toyota Connected mirrors ......153 Services......73 3-5. Opening and closing the 1-4. Theft deterrent system windows Engine immobilizer Power windows ....
Page 5 4-5. Using the driving support Driving systems Toyota Safety Sense..215 PCS (Pre-Collision 4-1. Before driving System)......222 Driving the vehicle .....160 LDA (Lane Departure Cargo and luggage ....170 Alert With Yaw Assist Trailer towing .....173 Function) ......233 4-2. Driving procedures RSA (Road Sign Assist) ..
Page 6 TABLE OF CONTENTS Interior features Maintenance and care 6-1. Maintenance and care 5-1. Using the air conditioning system and defogger Cleaning and protecting Front manual air the vehicle exterior..362 conditioning system ..324 Cleaning and protecting Front automatic air the vehicle interior... 365 conditioning system ..329 6-2.
Page 7 7-2. Steps to take in an Vehicle specifications emergency If your vehicle needs to be towed .......427 8-1. Specifications If you think something is Maintenance data wrong.......433 (fuel, oil level, etc.) ..474 If a warning light turns on Fuel information ....482 or a warning buzzer 8-2.
Page 8: For Your Information
Also, remodeling like this will have an effect on advanced safety equipment such as Toyota Safety Sense and there is a danger that it will not work prop- erly or the danger that it may work in situations where it should not be work- ing.
Page 9 Usage of data collected through Toyota Connected Services If your Toyota has Toyota Connected Services and if you have subscribed to those services, please refer to the Toyota Connected Services usage contract for information on data collected and its usage.
Page 10 EDR. Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 11 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 12: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.
Page 13: How To Search
How to search Searching by name • Alphabetical index ..P. 496 Searching installation position • Pictorial index....P. 12 Searching by symptom or sound • What to do if... (Troubleshooting) ..P. 492 Searching by title • Table of contents .... P. 2...
Page 14: Pictorial Index
Pictorial index Pictorial index Exterior The shape of the exterior lights may differ depending on the grade, etc. (P. 404) Side doors ........P. 113 Locking/unlocking .
Page 15 Pictorial index Windshield wipers ....... . . P. 208 Precautions against winter season ..... P. 319 Fuel filler door .
Page 16 Pictorial index Instrument panel Engine switch ....... . P. 183, 186 Starting the engine/changing the positions or modes .
Page 17 Pictorial index Meters ..........P. 91 Reading the meters .
Page 18 Outside rear view mirror switches....P. 153 Toyota parking assist-sensor switch....P. 272 Heater idle up switch.
Page 19 Pictorial index Audio remote control switches Paddle shift switches ......P. 196, 197 Talk switch Meter control switches ......P. 95 Vehicle-to-vehicle distance switch .
Page 20 Pictorial index Emergency flasher switch ......P. 422 Front-wheel drive control switch ..... P. 291 “DAC”...
Page 21 Pictorial index Interior SRS airbags ........P. 35 Floor mats .
Page 22 Pictorial index Cup holders ........P. 348 Auxiliary boxes .
Page 23 Pictorial index Inside rear view mirror ......P. 151 Sun visors ........P. 353 Vanity mirror .
Page 24 Pictorial index...
Page 25: For Safety And Security
For safe driving ....26 Seat belts......28 SRS airbags......35 Exhaust gas precautions ..45 1-2. Child safety Front passenger occupant classification system..46 Riding with children....51 Child restraint systems ..52 1-3. Emergency assistance Toyota Connected Services......73 1-4. Theft deterrent system Engine immobilizer system .......78 Alarm ........80...
Page 26: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 27 When installing the driver’s floor mat Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. Only use floor mats designed for the driver’s seat. Always install the floor mat securely using the retaining hooks (clips) pro- vided.
Page 28: For Safe Driving
1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 29 1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (P. 151, 153) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving.
Page 30: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 31 1-1. For safe use Fastening the seat belt (for the second center seat) Pull the plate to release, and pull out the seat belt. Connect by inserting plate B into buckle B until a click sound Plate B is heard. Buckle B Secure the belt by inserting plate A into buckle A until a...
Page 32 1-1. For safe use Releasing the seat belt (for the second center seat) To release the hooked plate A, Plate A push the buckle release button. Release button To release the hooked plate B insert the plate A etc. into the Plate B hole on the buckle B.
Page 33 1-1. For safe use Stow the buckles. Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pulling the lock release knob. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 34 If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent collisions. Seat belt regulations If seat belt regulations exist in the country where you reside, please contact your Toyota dealer for seat belt replacement or installation.
Page 35 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 36 Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 37: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 38 1-1. For safe use SRS airbag system components Front impact sensors Curtain shield airbags Airbag sensor assembly Driver’s knee airbag Side impact sensors (front Driver airbag door) SRS warning light Side impact sensors (rear) Front passenger airbag Seat belt pretensioners and “PASSENGER AIR BAG”...
Page 39 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 40 1-1. For safe use WARNING SRS airbag precautions Do not sit on the edge of the seat or lean against the dashboard. Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. Do not allow the front seat occupants to hold items on their knees.
Page 41 1-1. For safe use WARNING SRS airbag precautions Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and knee airbags deploy.
Page 42 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 43 The windshield may crack. Vehicles with Toyota Connected Services: If any of the following situations occur, the system is designed to send an emergency call to the Toyota Con- nected Services control center, notifying them of the vehicle’s location (with- out needing to push the “SOS”...
Page 44 1-1. For safe use Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags, SRS side and curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 45 When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. The front of the vehicle is damaged or...
Page 46 1-1. For safe use The pad section of the steering wheel, dashboard near the front passenger air- bag cover or lower portion of the instru- ment panel is scratched, cracked, or otherwise damaged. The surface of the seats with the SRS side airbag is scratched, cracked, or oth- erwise damaged.
Page 47: Exhaust Gas Precautions
Important points while driving Keep the back door closed. If you smell exhaust gases in the vehicle even when the back door is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. When parking If the vehicle is in a poorly ventilated area or a closed area, such as a garage, stop the engine.
Page 48: 1-2. Child Safety
1-2. Child safety Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and front passenger’s seat belt pretensioner. SRS warning light Seat belt reminder light “PASSENGER AIR BAG”...
Page 49 1-2. Child safety Condition and operation in the front passenger occupant classi- fication system Adult “PASSENGER AIR BAG” indicator ON indicator Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Devices Activated Front passenger’s seat belt pretensioner Child or child restraint system “PASSENGER AIR BAG”...
Page 50 1-2. Child safety Unoccupied “PASSENGER AIR BAG” indicator OFF indicator Indicator/ SRS warning light warning light Seat belt reminder light Front passenger airbag Deactivated Activated Devices Front passenger’s seat belt pretensioner deactivated There is a malfunction in the system “PASSENGER AIR BAG” indicator OFF indicator Indicator/ SRS warning light...
Page 51 1-2. Child safety : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. : In the event the front passenger is wearing a seat belt. : In the event the front passenger does not wear a seat belt.
Page 52 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 53: Riding With Children
1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. It is recommended that children sit in the rear seats to avoid acci- dental contact with the shift lever, wiper switch etc.
Page 54: Child Restraint Systems
1-2. Child safety Child restraint systems Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual. Use a child restraint system when riding with a small child that can- not properly use a seat belt.
Page 55 General installation instruction is provided in this manual. Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 56: When Using A Child Restraint System
1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger seat For the safety of a child, install child restraint systems to a rear seat. When installing child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
Page 57 1-2. Child safety WARNING When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. Never use a rear-facing child restraint system on the front passenger seat when “ON” of the “PASSENGER AIR BAG” indicator is illuminated. (P.
Page 58 1-2. Child safety WARNING When using a child restraint system Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint on the front passenger seat, move the seat as far back as pos- sible.
Page 59: Child Restraint System Compatibility For Each Seating Position
1-2. Child safety Child restraint system compatibility for each seating position Child restraint system compatibility for each seating position Compatibility of each seating position with child restraint systems (P. 59) displays the type of child restraint systems that can be used and possible seating positions for installation using symbols.
Page 60 1-2. Child safety : UN(ECE) R44 and UN(ECE) R129 are U.N. regulations for child restraint systems. : The child restraint systems mentioned in the table may not be avail- able outside of the EU area. : The displayed mark may differ depending on the product. Checking the category of the child restraint system.
Page 61 1-2. Child safety Compatibility of each seating position with child restraint sys- tems 1, 2, 3 2, 3 2, 3 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for i-Size and ISOFIX child restraint system. Includes a top tether anchorage point.
Page 62 1-2. Child safety : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position. When installing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle until good contact is achieved.
Page 63 1-2. Child safety Detail information for child restraint systems installation Seating position Vehicles with front passenger occupant classification Seat position number system “PASSENGER AIR BAG” indicator Seating position suitable Forward for universal belted (Yes/ facing only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/ Suitable rearward facing...
Page 64 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 65 1-2. Child safety When installing a child restraint in the rear seats, adjust the front seat so that it does not interfere with the child or child restraint system. When installing a child seat with support base, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference.
Page 66: Child Restraint System Installation Method
1-2. Child safety Child restraint system installation method Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt P. 65 attachment ISOFIX rigid anchor P. 68 attachment Child restraint anchor fitting...
Page 67: Fixed With A Seat Belt
1-2. Child safety Child restraint system fixed with a seat belt Installing child restraint system using a seat belt Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If the child restraint system on hand is not within the “universal” cat- egory (or the necessary information is not in the table), refer to the “Vehicle List”...
Page 68 You may need a locking clip to install the child restraint system. Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from your Toyota dealer: Locking clip for child restraint system (Part No. 73119-22010)
Page 69 1-2. Child safety WARNING When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious inju- ries that could result in death.
Page 70: Fixed With An Isofix Rigid Anchor
1-2. Child safety Child restraint system fixed with an ISOFIX rigid anchor ISOFIX rigid anchors (ISOFIX child restraint system) Lower anchors are provided for the outboard second seats. (Tags displaying the location of the anchors are attached to the seats.) Installation with ISOFIX rigid anchor (ISOFIX child restraint system) Install the child restraint system in accordance to the operation...
Page 71 1-2. Child safety Check the positions of the exclusive fixing bars, and install the child restraint sys- tem to the seat. The bars are installed in the clearance between the seat cushion and seatback. After installing the child restraint system, rock it back and forth to ensure that it is installed securely.
Page 72: Using A Child Restraint Anchor Fitting
1-2. Child safety Using a child restraint anchor fitting Child restraint anchor fitting Anchor fittings are provided for Center second seat each second seat. anchor fitting Use anchor fitting when fixing the strap. Outboard second seat anchor fitting Fixing the strap to the anchor fitting Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
Page 73 1-2. Child safety Center second seats  Adjust the head restraint to the downmost position. If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove head restraint. (P. 147) Remove the anchor fitting Upper cover, latch the attaching clip anchorage...
Page 74 1-2. Child safety WARNING When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. Firmly attach the upper anchorage strap and make sure that the belt is not twisted. Do not attach the upper anchorage strap to anything other than the anchor fitting.
Page 75: Services
1-3. Emergency assistance 1, 2 Toyota Connected Services Toyota Connected Services are telematics services that use Global Positioning System (GPS) data and embedded cellular technology to enable the following emergency calls to be made: ACN (Automatic Collision Notification) and SOS Emergency Call (Manual emergency service notification) (by pressing the “SOS”...
Page 76 1-3. Emergency assistance Toyota Connected Services ACN (Automatic Collision Notification) If any airbag deploys, the system is designed to automatically call the Emergency Call Centre. The Call Centre Agent will determine your vehicle’s location, the time of the incident and the vehicle VIN, and attempt to speak with the vehicle occupants to assess the situ- ation.
Page 77 “ON” position (vehicles without smart entry & start system) or IGNITION ON mode (vehi- cles with smart entry & start system), the system may be malfunc- tioning or the backup battery may be depleted. Contact your Toyota dealer. Free/Open Source Software Information This product contains Free/Open Source Software (FOSS).
Page 78 ACN/SOS cannot be made. • Enabled Toyota vehicles collect and transmit vehicle data to provide connected services. SOS and Automatic Collision Notification may be disabled if green LED under SOS button is not illuminated. For more info including re-activation, visit https://www.toyota.com.au/privacy...
Page 79 Using the system while there is smoke or an unusual smell may cause a fire. Stop using the system immediately and consult your Toyota dealer. NOTICE To prevent damage Do not pour any liquids onto the “SOS”...
Page 80: Theft Deterrent System Engine Immobilizer System
1-4. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 81 1-4. Theft deterrent system System maintenance The vehicle has a maintenance-free type engine immobilizer system. Conditions that may cause the system to malfunction If the grip portion of the key is in contact with a metallic object If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle NOTICE To ensure the system operates correctly...
Page 82: Alarm
1-4. Theft deterrent system  Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: A locked door is opened in any way other than using the entry func- tion (vehicles with smart entry &...
Page 83 1-4. Theft deterrent system System maintenance The vehicle has a maintenance-free type alarm system. Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: Nobody is in the vehicle. The windows are closed before the alarm is set.
Page 84 1-4. Theft deterrent system...
Page 85: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......84 Gauges and meters .....91 Multi-information display ..94 Fuel consumption information.......104...
Page 86: Instrument Cluster Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 87 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Brake system warning PCS warning light light (P. 434) (P. 436) (Flashes or illuminates) 1, 2 Malfunction indicator LDA indicator (P. 436) lamp (P.
Page 88 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light turns on or flashes to indicate a malfunction.
Page 89: Indicators
2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. 1, 2 Turn signal indicator Slip indicator (P. 303) (P. 201) 1, 3 Headlight high beam VSC OFF indicator indicator (P. 204) (P.
Page 90 2. Instrument cluster Low outside LDA indicator (P. 239) temperature indicator (P. 91) 7, 8 BSM outside rear view Parking brake indicator mirror indicators light (P. 202) (P. 264) (if equipped) 1, 2 BSM OFF indicator “AUTO LSD” indicator (P. 264) (P.
Page 91 If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system. If this occurs, have the vehicle inspected by your Toyota dealer. : This light illuminates on the outside rear view mirrors.
Page 92 Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
Page 93: Gauges And Meters
2. Instrument cluster Gauges and meters Tachometer Displays the engine speed in revolutions per minute. Outside temperature Displays the outside temperature. The temperature range that can be dis- played is from -40°C (-40°F) to 50°C (122°F). The low outside temperature indicator comes on when the ambient temperature is approximately 3°C (37°F) or lower, and turns off when approximately 5°C (41°F) or higher.
Page 94 2. Instrument cluster Multi-information display Presents the driver with a variety of driving-related data. (P. 94) Shift position and shift range Displays the selected shift position or selected shift range. (P. 192) Engine coolant temperature gauge Displays the engine coolant temperature. Changing the display Pressing this button switches among odometer, trip meter and instru- ment panel light control displays.
Page 95 When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) When “--” is displayed The system may be malfunctioning. Take your vehicle to your Toyota dealer. WARNING The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display.
Page 96: Multi-Information Display
2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of vehi- cle data. The following information will be displayed when a menu icon is selected. Menu icons are displayed for a few seconds when the meter con- trol switches (P.
Page 97 2. Instrument cluster Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. (P. 439) Settings display Select to change the meter display settings. (P. 483) Operating the meter control switches The multi-information display is operated using the meter control switches.
Page 98 2. Instrument cluster Drive information Items displayed can be changed by pressing “<” or “>” of the meter control switches to select and pressing “” or “”. Drive information 1 and 2 1, 2 Current fuel economy (bar type /value type) Displays the current rate of fuel consumption.
Page 99 The tire direction is displayed in 3 stages for both left and right, in accor- dance with the angle of the tire. While Toyota parking assist-sensor (P. 272) is operating or any door is not fully closed, the related information is displayed with the direction of the front tires.
Page 100 2. Instrument cluster Settings display The settings of the following items can be changed. (P. 483) LDA (Lane Departure Alert With Yaw Assist Function) (P. 233) Select to set up the following items. Yaw Assist Select to enable/disable yaw assist function. Warning Sensitivity Select to set the warning sensitivity.
Page 101 2. Instrument cluster BSM (Blind Spot Monitor) (if equipped) (P. 264) Select to enable/disable the Blind Spot Monitor. RCTA (Rear Cross Traffic Alert) function (if equipped) (P. 282) Select to enable/disable the RCTA function. Vehicle Setting Power back door system (if equipped) Select to enable/disable the power back door system.
Page 102 2. Instrument cluster Meter Customization Units Select to change the unit for measure of the fuel consumption. Eco Driving Indicator Light Select to activate/deactivate the Eco Driving Indicator Light. (  P. 90) switch settings You can register 1 screen as the top screen. To register, press and hold while the desired screen is displayed.
Page 103 2. Instrument cluster Pop-up display The pop-up display is displayed on the multi-information display according to the operating conditions of the following functions: Route guidance display of the navigation system-linked system (if equipped) Incoming call display of the hands-free phone system The pop-up display function can be set on/off.
Page 104 2. Instrument cluster Eco Saving Displays the fuel consumption comparison, the average fuel consumption after reset, and the cost of the consumed fuel. Fuel consumption comparison Displays the set fuel consumption that is compared with the actual fuel con- sumption. Average fuel consumption after reset Displays the average fuel consumption since the function was reset.
Page 105 2. Instrument cluster WARNING Caution for use while driving When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
Page 106: Fuel Consumption Information
2. Instrument cluster Fuel consumption information The fuel consumption information can be displayed on the navi- gation system or multimedia system screen. Navigation system or multime- dia system screen “MENU” button “INFO” button (if equipped) Displaying trip information or history screen ...
Page 107 2. Instrument cluster Fuel consumption Trip information If the trip information screen does not appear, select “Trip Informa- tion”. Fuel consumption in the past 15 minutes Current fuel consumption Reset the trip information data “History” screen appears Cruising range Elapsed time since engine was started...
Page 108 2. Instrument cluster History If the history screen does not appear, select “History”. Best recorded fuel consump- tion Latest fuel consumption Previous fuel consumption record Reset the history data Update the latest fuel con- sumption data “Trip Information” screen appears The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
Page 109: Operation Of Each Component
Operation of each component 3-1. Key information Keys........108 3-2. Opening, closing and locking the doors Side doors......113 Back door......118 Smart entry & start system ......131 3-3. Adjusting the seats Front seats......138 Rear seats ......140 Head restraints ....147 3-4. Adjusting the steering wheel and mirrors Steering wheel ....149 Inside rear view mirror ..151...
Page 110: 3-1. Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle.  Vehicles without smart entry & start system Master keys Valet key Wireless remote controls Operating the wireless remote con- trol function (P. 109) Key number plate ...
Page 111 3-1. Key information Wireless remote control Vehicles without smart entry & start system  Locks all the doors (P. 113) Check that the door is securely locked. Unlocks all the doors (P. 113)  Vehicles with smart entry & start system Locks all the doors (P.
Page 112 If you lose your keys New genuine keys can be made by your Toyota dealer using a master key (vehicles without smart entry & start system) or the other key (vehicles with smart entry & start system) and the key number stamped on your key number...
Page 113 Vehicles with smart entry & start system P. 136 Replacing the electronic key battery P. 395 Confirmation of the registered key number The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details.
Page 114 When an electronic key is lost (vehicles with smart entry & start sys- tem) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
Page 115: Opening, Closing And Locking The Doors
3-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry func- tion, wireless remote control, key or door lock switch. Locking and unlocking the doors from outside Smart entry & start system (if equipped) While carrying the electronic key, press the button to lock and unlock.
Page 116 3-2. Opening, closing and locking the doors  Vehicles without smart entry & start system Locks all the doors Unlocks all the doors  Vehicles with smart entry & start system The doors can also be locked and unlocked with the mechanical key.
Page 117 3-2. Opening, closing and locking the doors If a symbol indicating one or more doors are open is shown on the multi- information display One or more of the doors is not fully closed. The system also indicates which doors are not fully closed. If the vehicle reaches a speed of 5 km/h (3 mph), master warning light flashes and a buzzer sounds to indicate that the door(s) are not yet fully closed.
Page 118 3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. Close the door while pulling the door handle. Vehicles without smart entry & start system: The driver’s door cannot be locked if either of the door is open and the key is in the engine switch.
Page 119 3-2. Opening, closing and locking the doors Conditions affecting operation  Vehicles without smart entry & start system The wireless remote control function may not operate normally in the follow- ing situations: Near a TV tower, radio station, electric power plant, airport or other facility that generates strong radio waves When carrying a portable radio, cellular phone or other wireless communi- cation device...
Page 120: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened/closed by the following procedures. Locking and unlocking the back door Entry function (vehicles with smart entry & start system) Carry the electronic key to enable this function. Unlock all the doors.
Page 121 3-2. Opening, closing and locking the doors Opening/closing the back door with the wireless remote control (vehicles with power back door) Press and hold the switch to open/ close the power back door. If the back door is locked, unlock it before operating the power back door.
Page 122 3-2. Opening, closing and locking the doors Opening the back door from outside the vehicle Back door opener Vehicles without power back  door Raise the back door while pressing up the back door opener switch. Vehicles with power back ...
Page 123 3-2. Opening, closing and locking the doors Closing the back door from outside the vehicle Back door handle Lower the back door using the back door handle. Vehicles without power back door: Make sure to push the back door down from the out- side to close it.
Page 124 3-2. Opening, closing and locking the doors Changing settings of the power back door system (vehicles with power back door) The power back door system can be enabled/disabled on (P. 98) of the multi-information display. Adjusting the open position of the back door (vehicles with power back door) The open position of the power back door can be adjusted.
Page 125 3-2. Opening, closing and locking the doors Loose the screw and move the cover.  Vehicles without power back door  Vehicles with power back door Move the lever.  Vehicles without power back door  Vehicles with power back door...
Page 126 3-2. Opening, closing and locking the doors If a symbol indicating the back door is open is shown on the multi-infor- mation display The back door is not fully closed. If the vehicle reaches a speed of 5 km/h (3 mph), master warning light flashes and a buzzer sounds to indicate that the back door is not yet fully closed.
Page 127 3-2. Opening, closing and locking the doors Operation of the power back door (vehicles with power back door) A buzzer sounds and the emergency flashers flash twice, and the back door automatically opens and closes. When the power back door operations are off, the power back door is not operate but it can be opened and closed by hand.
Page 128 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Caution while driving Make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the luggage compartment may be thrown out, causing an acci- dent.
Page 129 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.
Page 130 3-2. Opening, closing and locking the doors WARNING Back door closer (vehicles with power back door) In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. It takes several seconds before the back door closer begins to operate.
Page 131 When installing an accessory part to the back door, ask your Toyota dealer for details. Jam protection function (vehicles with power back door) Observe the following precautions.
Page 132 Do not attach heavy accessories to the back door. When attaching, ask your Spindle Toyota dealer for details. Do not place your hand on the spindle or apply lateral forces to it. To prevent back door closer malfunction (vehicles with power back...
Page 133: Smart Entry & Start System
3-2. Opening, closing and locking the doors  Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. Locks and unlocks the side doors (P.
Page 134 3-2. Opening, closing and locking the doors Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of either of the lock/unlock button on the outside door handle.
Page 135 3-2. Opening, closing and locking the doors Alarms and warning indicators A combination of exterior and interior alarms as well as warning messages shown on the multi-information display are used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate mea- sures in response to any warning message on the multi-information display.
Page 136 3-2. Opening, closing and locking the doors Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situa- tions, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote control and engine immobilizer system from operating properly.
Page 137 (6 ft.) of the vehicle. The smart entry & start system can be deactivated in advance. Ask your Toyota dealer for details. To operate the system properly Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle.
Page 138 Retrieve the electronic key from the vehicle and lock the doors again. Customization that can be configured at your Toyota dealer Settings (e.g. smart entry & start system) can be changed.
Page 139 (P. 131) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitting radio waves.
Page 140: 3-3. Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure  Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s seat only)  Power seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical...
Page 141 3-3. Adjusting the seats WARNING When adjusting the seat position Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. Do not put your hands under the seat or near the moving parts to avoid injury.
Page 142: Rear Seats
3-3. Adjusting the seats Rear seats Adjustment procedure Second seats Seatback angle adjustment lever Seat position adjustment lever Third seats Seatback angle adjustment lever Moving a second seat for third seat access Before tumbling the second seats Stow the second center seat belt. (P. 30) Lower the head restraints to the lowest position.
Page 143 3-3. Adjusting the seats Getting in the vehicle Pull the seatback angle adjust- ment lever to fold down the seatback and swing the whole seat up and forward. Getting out of the vehicle Pull the seatback angle adjust- ment lever to fold down the seatback and swing the whole seat up and forward.
Page 144 3-3. Adjusting the seats Tumbling the second seats Before tumbling the second seats P. 140 Tumbling the second seats Fold down seatback while pulling the seatback angle adjustment lever, and swing the whole seat up and forward. Take the holding strap out of the pocket.
Page 145 3-3. Adjusting the seats Hook the holding strap to the head restraint and secure the seat by pulling its free end. When returning the second seat to its original position, stow the holding strap into the pocket. Folding up the third seats Before folding up the third seats Lower the head restraints to the lowest position.
Page 146 3-3. Adjusting the seats Folding up the third seats Take the holding strap out of the pocket. Pull the lock release strap to fold it down.
Page 147 3-3. Adjusting the seats Swing the whole seat up sideward. Attach the strap to the hook, and pull the end of the strap to eliminate the slackness and fix it with the hook-and- loop fastener. Stow the seat leg. When returning the seat to its original position, stow the hold- ing strap into the pocket.
Page 148 3-3. Adjusting the seats WARNING When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. Do not fold the seatbacks down while driving. Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 149: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Second and third seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.
Page 150 3-3. Adjusting the seats Removing the head restraints Pull the head restraint up while pressing the lock release button. Lock release button Installing the head restraints Align the head restraint with the installa- tion holes and push it down to the lock position.
Page 151: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 152 3-4. Adjusting the steering wheel and mirrors WARNING Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. After adjusting the steering wheel Make sure that the steering wheel is securely locked.
Page 153: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 154 3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode ON/OFF When the automatic anti-glare function is in ON mode, the indica- tor illuminates.
Page 155: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, move the switch. Right Down Left Folding and extending the mirrors Press the switch. Folding Extending...
Page 156 3-4. Adjusting the steering wheel and mirrors Mirror angle can be adjusted when  Vehicles without smart entry & start system The engine switch is in the “ACC” or “ON” position.  Vehicles with smart entry & start system The engine switch is in ACCESSORY or IGNITION ON mode. WARNING Important points while driving Observe the following precautions while driving.
Page 157: Opening And Closing The
3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows:  Type A Closing Opening One-touch opening (driver’s window only) One-touch closing (driver’s window only) : To stop the window partway,...
Page 158 3-5. Opening and closing the windows Window lock switch Press the switch down to lock the passenger window switches. Use this switch to prevent children from accidentally opening or clos- ing a passenger window. The power windows can be operated when ...
Page 159 1 second or more. If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehi- cle inspected by your Toyota dealer.
Page 160 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Closing the windows The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 161: Driving
Driving 4-1. Before driving 4-5. Using the driving support systems Driving the vehicle .....160 Toyota Safety Sense ..215 Cargo and luggage ....170 PCS (Pre-Collision Trailer towing .....173 System) ......222 4-2. Driving procedures LDA (Lane Departure Engine (ignition) switch Alert With Yaw Assist (vehicles without Function)......233...
Page 162: 4-1. Before Driving
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 183, 186 Driving With the brake pedal depressed, shift the shift lever to D. (P. 192) Release the parking brake. (P. 202) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 163 4-1. Before driving When starting off on an uphill The hill-start assist control will activate. (P. 302) Driving in the rain Drive carefully when it is raining, because visibility will be reduced, the win- dows may become fogged-up, and the road will be slippery. Drive carefully when it starts to rain, because the road surface will be espe- cially slippery.
Page 164 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drum are replaced. Have your Toyota dealer per- form the bedding down operation.
Page 165 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. When driving the vehicle Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
Page 166 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When driving on slippery road surfaces Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle. Sudden acceleration, engine braking due to shifting, or changes in engine speed could cause the vehicle to skid.
Page 167 Failure to do so may result in death or serious injury. If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 168 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When the vehicle is parked Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: •...
Page 169 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When taking a nap in the vehicle Always turn the engine off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to engine overheating.
Page 170 4-1. Before driving NOTICE When driving the vehicle Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output. Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill.
Page 171 Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: Brake function Changes in quantity and quality of oil and fluid used for the engine, trans- mission, transfer, differential, etc.
Page 172: Cargo And Luggage
Roof luggage carrier (if equipped) Roof luggage carrier components To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more gen- uine Toyota cross rails or their equivalent. Follow manufacturer’s instructions...
Page 173 4-1. Before driving WARNING Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compartment: Receptacles containing gasoline Aerosol cans Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or pas- sengers, possibly causing an accident.
Page 174 4-1. Before driving WARNING Load and distribution Do not overload your vehicle. Do not apply loads unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury. When loading cargo on the roof luggage carrier (if equipped) Observe the following precautions: Place the cargo so that its weight is distributed evenly between the front and rear axles.
Page 175: Trailer Towing
Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. For towing purposes, Toyota recommends the use of the following parts: When towing a caravan trailer etc., use a distributing hitch. When the total trailer weight is greater than the vehicle weight, use a sway control device.
Page 176 Total trailer weight Tongue load Towing a trailer Contact your Toyota dealer for further information about additional requirements such as a towing kits etc. Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer. Even though the vehicle may be rated for towing a higher weight, the operator must never exceed the maximum weight rating specified for the trailer hitch.
Page 177 4-1. Before driving Selecting a trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer cou- pler. Most couplers are stamped with the required trailer ball size.
Page 178 Break-in schedule Toyota recommends that you do not use a new vehicle or a vehicle with any new power train components (engine, transmission, differential, wheel bear- ings, etc.) to tow a trailer for the first 800 km (500 miles) of driving.
Page 179 4-1. Before driving If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 180 4-1. Before driving WARNING To avoid accident or injury The total trailer weight (trailer weight plus the weight of cargo) must not exceed 3100 kg (6834 lb.). The gross combined weight (sum of your vehicle weight plus its load and the total trailer weight) must not exceed 5550 kg (12236 lb.).
Page 181 NOTICE When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. Do not use axle-mounted hitches, as they can cause damage to the axle housing, wheel bearings, wheels or tires.
Page 182 4-1. Before driving Trailer towing tips Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: Before starting out, check the trailer lights and the vehicle-trailer connections.
Page 183 4-1. Before driving Crosswinds and rough roads will adversely affect handling of your vehicle and trailer, causing sway. Periodically check the rear to pre- pare for being passed by large trucks or buses, which may cause your vehicle and trailer to sway. If swaying occurs, firmly grip the steering wheel, reduce speed immediately but gradually, and steer straight ahead.
Page 184 4-1. Before driving Always place wheel blocks under both the vehicle and the trailer wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoidable, do so only after performing the following: Apply the brakes and keep them applied.
Page 185: Engine (Ignition) Switch (Vehicles Without
4-2. Driving procedures Engine (ignition) switch (vehicles without smart entry & start system) Starting the engine Check that the parking brake is set. Check that the shift lever is set in P. Firmly depress the brake pedal. Turn the engine switch to the “ON” position. indicator turns on.
Page 186 “LOCK” position. If the engine does not start The engine immobilizer system may not have been deactivated. (P. 78) Contact your Toyota dealer. When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 187 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. Do not race a cold engine. If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately.
Page 188: Engine (Ignition) Switch (Vehicles With Smart Entry & Start System)
4-2. Driving procedures Engine (ignition) switch (vehicles with smart entry & start system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is set in P.
Page 189 4-2. Driving procedures Stopping the engine Stop the vehicle. Set the parking brake (P. 202), and shift the shift lever to P. Press the engine switch. Release the brake pedal and check that the display on the instru- ment cluster is off. Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal released.
Page 190 4-2. Driving procedures When stopping the engine with the shift lever in a position other than P If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode.
Page 191 P. 135 If the engine does not start The engine immobilizer system may not have been deactivated. (P. 78) Contact your Toyota dealer. Steering lock After turning the engine switch off and opening and closing the doors, the steering wheel will be locked due to the steering lock function. Operating the engine switch again automatically cancels the steering lock.
Page 192 4-2. Driving procedures If the smart entry & start system has been deactivated in a customized setting P. 461 WARNING When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury.
Page 193 Do not race a cold engine. If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 194: Automatic Transmission
4-2. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. Shifting the shift lever  Vehicles without smart entry & start system While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 195 4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral (Condition in which the power is not transmitted) Normal driving S mode driving (P. 197) : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving.
Page 196 4-2. Driving procedures Selecting the driving mode The driving modes can be selected to suit driving conditions.  Type A Eco drive mode Use Eco drive mode to help achieve low fuel consump- tion during trips that involve frequent accelerating. Press the “ECO”...
Page 197 4-2. Driving procedures Type B  Normal mode For normal driving. Press the “NORM” switch to change the driving mode to nor- mal mode when selected to Eco drive mode or sport mode. Eco drive mode Use Eco drive mode to help achieve low fuel consump- tion during trips that involve frequent accelerating.
Page 198 4-2. Driving procedures Selecting shift ranges in the D position (vehicles with paddle shift switches) To drive using temporary shift range selection, operate the “-” or “+” paddle shift switch. When the “-” paddle shift switch is operated, the shift range will be downshifted to a range that enables engine braking force that is suit- able to driving conditions.
Page 199 4-2. Driving procedures Selecting shift ranges in the S position To enter S mode, shift the shift lever to S. Shift ranges can be selected by operating the shift lever or paddle shift switches, allowing you to drive in the shift range of your choosing. Upshifting Downshifting The selected shift range, from 1 to...
Page 200 4-2. Driving procedures Downshifting restrictions warning buzzer To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever is operated. (A buzzer will sound twice.) Operation of the air conditioning system in Eco drive mode (vehicles with automatic air conditioning system) Eco drive mode controls the heating/cooling operations and fan speed of the...
Page 201 S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. Transmission protection function If the tires spin continually when the vehicle becomes stuck in mud, dirt or...
Page 202 When the warning message goes out, the vehicle can be driven again. If the warning message does not go out after waiting a while, have your vehi- cle inspected by your Toyota dealer. AI-SHIFT The AI-SHIFT automatically selects the suitable gear according to driver per- formance and driving conditions.
Page 203: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Left turn Right turn Lane change to the left (move the lever partway and release The left hand signals will flash 3 times. Lane change to the right (move the lever partway and release The right hand signals will flash 3 times.
Page 204: Parking Brake
4-2. Driving procedures Parking brake Sets the parking brake Fully pull the parking brake while depressing the brake pedal. At this time, the parking brake indi- cator light will come on. Releases the parking brake Slightly raise the lever and lower it completely while pressing the but- ton.
Page 205: Operating The Lights And
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Operating the switch turns on the lights as follows: The headlights, front position, tail, tail and side marker, license plate, instrument panel lights, and daytime run- ning lights (P.
Page 206 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 207 4-3. Operating the lights and wipers Daytime running light system To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch in .
Page 208 Customization that can be configured at Toyota dealer Setting of the light sensor sensitivity can be changed. (Customizable features: P. 483)
Page 209: Fog Light Switch
4-3. Operating the lights and wipers  Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Turns the fog lights off Turns the fog lights on Fog lights can be used when The headlights or front position lights are turned on.
Page 210: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operating the lever operates the wipers or washer as follows. Intermittent operation Low speed operation High speed operation Temporary operation Wiper interval can be adjusted when intermittent operation is selected.
Page 211 Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 212: Rear Window Wiper And Washer
4-3. Operating the lights and wipers Rear window wiper and washer Operating the lever operates the rear wiper as follows. Intermittent operation Normal operation Washer/wiper dual oper- ation Pushing the lever operates the wiper and washer. The wiper will automatically oper- ate a couple of times after the washer squirts.
Page 213 Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 214: Refueling Opening The Fuel Tank Cap
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle Vehicles without smart entry & start system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed.
Page 215 4-4. Refueling WARNING When refueling Observe the following precautions to prevent fuel overflowing from the fuel tank: Securely insert the fuel nozzle into the fuel filler neck. Stop filling the tank after the fuel nozzle automatically clicks off. Do not top off the fuel tank. NOTICE Refueling Do not spill fuel during refueling.
Page 216 WARNING When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 217: Using The Driving Support
WARNING Toyota Safety Sense The Toyota Safety Sense is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 218 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Front camera...
Page 219 Do not subject the radar sensor or its surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. Do not disassemble the radar sensor.
Page 220 • If the inner side of the windshield where the front camera is installed is dirty, contact your Toyota dealer. Do not attach objects, such as stickers, transparent stickers, etc., to the outer...
Page 221 When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens of the front camera. Also, do not touch the lens. If the lens is dirty or damaged, contact your Toyota dealer. Do not subject the front camera to a strong impact.
Page 222 In the following situations, perform the actions specified in the table. When the normal operating conditions are detected, the message will disappear and the system will become operational. If the message does not disappear, contact your Toyota dealer. Situation Actions...
Page 223 If the message does not disappear, contact your Toyota dealer. • When the temperature around the radar sensor is outside of the opera- tional range, such as when the vehicle is in the sun or in an extremely cold environment •...
Page 224: Pcs (Pre-Collision System)
4-5. Using the driving support systems PCS (Pre-Collision System) The pre-collision system uses a radar sensor and front camera to detect objects (P. 222) in front of the vehicle. When the sys- tem determines that the possibility of a frontal collision with an object is high, a warning operates to urge the driver to take eva- sive action and the potential brake pressure is increased to help the driver avoid the collision.
Page 225 4-5. Using the driving support systems System functions Pre-collision warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi- information display to urge the driver to take evasive action.
Page 226 4-5. Using the driving support systems WARNING Limitations of the pre-collision system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
Page 227 4-5. Using the driving support systems WARNING When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: When the vehicle is being towed When your vehicle is towing another vehicle When transporting the vehicle via truck, boat, train or similar means of transportation...
Page 228 4-5. Using the driving support systems Changing settings of the pre-collision system Enabling/disabling the pre-collision system The pre-collision system can be enabled/disabled on (P. 98) of the multi-informa- tion display. The system is automatically enabled each time the engine switch is turned to the “ON” position (vehicles without smart entry &...
Page 229 4-5. Using the driving support systems Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a detected object is high. Each function is operational at the following speed Pre-collision warning Relative speed between Detectable objects Vehicle speed...
Page 230 4-5. Using the driving support systems Object detection function The system detects objects based on their size, profile, motion, etc. However, an object may not be detected depending on the surrounding brightness and the motion, posture, angle detected object, preventing the system from operating properly.
Page 231 4-5. Using the driving support systems • When there are patterns or paint in front of your vehicle that may be mis- taken for a detectable object • When the front of your vehicle is hit by water, snow, dust, etc. •...
Page 232 4-5. Using the driving support systems • When driving through under objects that may contact your vehicle, such as thick grass, tree branches, or a banner • When driving through steam or smoke • When driving near an object that reflects radio waves, such as a large truck or guardrail •...
Page 233 4-5. Using the driving support systems • If a vehicle ahead is a motorcycle • If a vehicle ahead is narrow, such as a personal mobility vehicle • If a preceding vehicle has a small rear end, such as an unloaded truck •...
Page 234 4-5. Using the driving support systems • If the front of the vehicle is raised or lowered • If the wheels are misaligned • If a wiper blade is blocking the front camera • The vehicle is being driven at extremely high speeds •...
Page 235: Lda (Lane Departure Alert With Yaw Assist Function)
4-5. Using the driving support systems LDA (Lane Departure Alert With Yaw Assist Function) Summary of functions When driving on a road with clear white (yellow) lane lines, this func- tion alerts the driver when the vehicle might depart from its lane or course and provides assistance by applying a brake force to keep the vehicle in its lane or course...
Page 236 Do not modify the suspension etc. If the suspension etc. needs to be replaced, contact your Toyota dealer. Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). If your windshield needs repairs, contact your Toyota dealer.
Page 237 4-5. Using the driving support systems WARNING Conditions in which functions may not operate properly In the following situations, the functions may not operate properly and the vehicle may depart from its lane. Drive safely by always paying careful attention to your surroundings and operate the steering wheel to correct the path of the vehicle without relying solely on the functions.
Page 238 4-5. Using the driving support systems WARNING The white (yellow) lines are cracked, “Raised pavement marker” or stones are present. The white (yellow) lines cannot be seen or are difficult to see due to sand, etc. The vehicle is driven on a road surface that is wet due to rain, puddles, etc.
Page 239 4-5. Using the driving support systems Functions included in LDA system Lane departure alert function When the system determines that the vehicle might depart from its lane or course warning is displayed on the multi-information display, and a warning buzzer will sound to alert the driver.
Page 240 4-5. Using the driving support systems Yaw assist function When the system determines that the vehicle might depart from its lane or course , the system provides assistance as necessary by applying a brake force for a short period of time to keep the vehicle in its lane.
Page 241 4-5. Using the driving support systems Turning LDA system on Press the LDA switch to turn the LDA system on. The LDA indicator illuminates and a message is displayed on the multi-information display. Press the LDA switch again to turn the LDA system off.
Page 242 4-5. Using the driving support systems Lane departure alert function display Displayed when the multi-information display is switched to the driving support system information screen. Inside of displayed lines is Inside of displayed lines is   white black Indicates that the system is recog- Indicates that the system is not nizing white (yellow) lines or a able to recognize white (yellow)
Page 243 4-5. Using the driving support systems Operation conditions of each function Lane departure alert function This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 50 km/h (32 mph) or more. •...
Page 244 4-5. Using the driving support systems Temporary cancelation of functions When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. (P. 241) Yaw assist function Depending on the vehicle speed, lane departure situation, road conditions, etc., the driver may not feel the function is operating or the function may not...
Page 245 “LDA Malfunction Visit Your Dealer” The system may not be operating properly. Have the vehicle inspected by your Toyota dealer. “LDA Unavailable” • The system is temporarily canceled due to a malfunction in a sensor other than the front camera.
Page 246: Rsa (Road Sign Assist)
4-5. Using the driving support systems RSA (Road Sign Assist) Summary of function The RSA system recognizes spe- cific road signs using the front camera to provide information to the driver via the display. If the system judges that the vehicle is being driven over the speed limit according to the recognized road signs, it notifies the driver through a visual notification and notification buzzer.
Page 247 4-5. Using the driving support systems Indication on the multi-information display When the front camera recognizes a sign, the sign will be displayed on the multi-information display. When the driving support sys- tem information is selected, a maximum of 2 signs can be dis- played.
Page 248 4-5. Using the driving support systems Notification function In the following situations, the RSA system will notify the driver. When the vehicle speed exceeds the speed notification threshold of the speed limit sign displayed, the sign display will be emphasized and a buzzer will sound.
Page 249 (vehicles without smart entry & start system) or IGNITION ON mode (vehicles with smart entry & start system). If “RSA Malfunction Visit Your Dealer” is shown The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. Customization Some functions can be customized. (Customizable features: P. 484)
Page 250: Dynamic Radar Cruise Control
4-5. Using the driving support systems Dynamic radar cruise control Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the pre- ceding vehicle even if the accelerator pedal is not depressed. In con- stant speed control mode, the vehicle runs at a fixed speed.
Page 251 4-5. Using the driving support systems WARNING Before using dynamic radar cruise control Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 252 4-5. Using the driving support systems WARNING Cautions regarding the driving assist systems Observe the following precautions, as there are limitations to the assistance provided by the system. Failure to do so may cause an accident resulting in death or serious injury. Assisting the driver to measure following distance The dynamic radar cruise control is only intended to help the driver in determining the following distance between the driver’s own vehicle and a...
Page 253 4-5. Using the driving support systems WARNING Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 254 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar to detect the presence of vehicles up to approximately 100 m (328 ft.) ahead, determines the current vehicle- to-vehicle following distance, and operates to maintain a suitable fol- lowing distance from the vehicle ahead.
Page 255 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. Example of deceleration cruising and follow-up cruising When a preceding vehicle driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle.
Page 256 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Dynamic radar cruise control indi- cator will come on and a message will be displayed on the multi-infor- mation display.
Page 257 4-5. Using the driving support systems Adjusting the set speed Adjusting the set speed by the lever To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 258 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle vehicle-to-vehicle distance as fol- mark lows: Long Medium Short Vehicle-to-vehicle distance settings (vehicle-to-vehicle distance control mode) Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 80 km/h (50 mph).
Page 259 4-5. Using the driving support systems Canceling and resuming the speed control Pulling the lever toward you cancels the speed control. The speed control is also canceled when brake pedal depressed. Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed.
Page 260 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar, etc.
Page 261 4-5. Using the driving support systems Dynamic Radar Cruise Control with Road Sign Assist When this function is enabled and the system is operating in vehicle- to-vehicle distance control mode (P. 252), when a speed limit sign is detected, the recognized speed limit will be displayed with an up/ down arrow.
Page 262 Switching the transfer mode is not completed within 5 seconds while the cruise control system is on. If vehicle-to-vehicle distance control mode is automatically canceled for any reasons other than the above, there may be a malfunction in the system. Contact your Toyota dealer.
Page 263 If constant speed control mode is automatically canceled for any reasons other than the above, there may be a malfunction in the system. Contact your Toyota dealer. The Dynamic Radar Cruise Control with Road Sign Assist may not oper- ate properly when...
Page 264 4-5. Using the driving support systems When the sensor may not be correctly detecting the vehicle ahead In the case of the following and depending on the conditions, operate the brake pedal when deceleration of the system is insufficient or operate the accelerator pedal when acceleration is required.
Page 265 4-5. Using the driving support systems Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 266: Bsm (Blind Spot Monitor)
4-5. Using the driving support systems  BSM (Blind Spot Monitor) The Blind Spot Monitor is a system that uses rear side radar sen- sors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when chang- ing lanes.
Page 267 When “Blind Spot Monitor Malfunction Visit Your Dealer” is shown on the multi-information display There may be a sensor malfunction or misaligned. Have the vehicle inspected by your Toyota dealer. Customization Some functions can be customized. (P. 486)
Page 268 Do not attach stickers or install accessories to the sensor or surrounding area on the rear bumper. Do not modify the sensor or surrounding area on the rear bumper. Do not paint the rear bumper any color other than an official Toyota color.
Page 269 4-5. Using the driving support systems Blind Spot Monitor operation Vehicles that can be detected by the Blind Spot Monitor The Blind Spot Monitor uses radar sensors to detect the following vehicles traveling in adjacent lanes and advises the driver of the presence of such vehicles via the indicators on the outside rear view mirrors.
Page 270 4-5. Using the driving support systems Blind Spot Monitor detection areas The areas that vehicles can be detected in are outlined below. The range of each detection area is: Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle : The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the vehicle cannot be detected.
Page 271 4-5. Using the driving support systems The Blind Spot Monitor is operational when The Blind Spot Monitor is operational when all of the following conditions are met: The engine switch is in IGNITION ON mode. The Blind Spot Monitor is on. The shift lever is in a position other than R.
Page 272 4-5. Using the driving support systems Conditions under which the system may not function correctly The Blind Spot Monitor may not detect vehicles correctly in the following sit- uations: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 273 4-5. Using the driving support systems Instances of the Blind Spot Monitor unnecessarily detecting a vehicle and/or object may increase in the following situations: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 274: Toyota Parking Assist-Sensor
4-5. Using the driving support systems Toyota parking assist-sensor The distance from your vehicle to objects, such as a wall, when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display and a buzzer. Always check the surrounding area when using this system.
Page 275 4-5. Using the driving support systems Turning Toyota parking assist-sensor on/off Turns Toyota parking assist-sen- sor on/off When on, the indicator light comes on to inform the driver that the sys- tem is operational. Display When the sensors detect an object, the following displays inform the driver of the position and distance to the object.
Page 276 4-5. Using the driving support systems Sensor detection display, object distance Distance display When an object is detected by a sensor, the approximate distance to the object will be displayed on the multi-information display. Approximate distance to object Multi- Rear center and information dis- Front corner sensor Rear corner...
Page 277 4-5. Using the driving support systems Buzzer operation and distance to an object A buzzer sounds when the sensors are operating. When an object is detected to the front or rear of the vehicle The buzzer sounds faster as the vehicle approaches an object. When the vehicle comes within the following distance of the object, the buzzer beeps continuously.
Page 278 4-5. Using the driving support systems Toyota parking assist-sensor can be operated when The engine switch is in the “ON” position (vehicles without smart entry & start system) or IGNITION ON mode (vehicles with smart entry & start sys- tem).
Page 279 4-5. Using the driving support systems The sensor is frozen. (Thawing the area will resolve this problem.) In especially cold weather, if a sensor is frozen, the screen may show an abnormal display, or objects may not be detected. The sensor is covered in any way. When a sensor or the area around a sensor is extremely hot or cold On an extremely bumpy road, on an incline, on gravel, or on grass...
Page 280 4-5. Using the driving support systems Situations in which the system may operate even if there is no possibil- ity of a collision In some situations, such as the following, the system may operate even though there is no possibility of a collision. When driving on a narrow road.
Page 281 If “Parking Assist Malfunction Visit Your Dealer” is displayed on the multi-information display Depending on the malfunction of the sensor, the device may not be working normally. Have the vehicle inspected by your Toyota dealer. If “Parking Assist Malfunction” is displayed on the multi-information dis- play Water may be continuously flowing over the sensor surface, such as in a heavy rain.
Page 282 Do not subject the surrounding area of the sensor to a strong impact. If subjected to an impact, have the vehicle inspected by your Toyota dealer. If the front or rear bumper needs to be removed/installed or replaced, con- tact your Toyota dealer.
Page 283 When using the Toyota parking assist-sensor In the following situations, the system may not function correctly due to a sensor malfunction etc. Have the vehicle checked by your Toyota dealer. Toyota parking assist-sensor operation display flashes, and a beep sounds when no objects are detected.
Page 284: Rcta (Rear Cross Traffic Alert) Function
4-5. Using the driving support systems  RCTA (Rear Cross Traffic Alert) function The RCTA function uses the BSM radar sensors installed on the inner side of the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up.
Page 285 When “Rear Cross Traffic Alert Malfunction Visit Your Dealer” is shown on the multi-information display There may be a sensor malfunction or misaligned. Have the vehicle inspected by your Toyota dealer. Radar sensors P. 266 Customization...
Page 286 4-5. Using the driving support systems RCTA function Operation of the RCTA function The RCTA function uses radar sensors to detect vehicles approaching from the right or left at the rear of the vehicle and alerts the driver of the presence of such vehicles by flashing the outside rear view mirror indicators and sounding a buzzer.
Page 287 4-5. Using the driving support systems RCTA function detection areas The areas that vehicles can be detected in are outlined below. The buzzer can alert the driver of faster vehicles approaching from farther away. Example: Approximate Approaching vehicle Speed alert distance Fast 28 km/h (18 mph) 20 m (66 ft.)
Page 288 A mute button will be displayed on the multi-information display when a vehi- cle or an object is detected. To mute the buzzer, press . The buzzers for the RCTA function and Toyota parking assist-sensor will be muted simultane- ously. Mute will be automatically canceled in the following situations: When the shift position is changed.
Page 289 4-5. Using the driving support systems Conditions under which the system will not detect a vehicle The RCTA function is not designed to detect the following types of vehicles and/or objects: Vehicles approaching from directly behind Vehicles backing up in a parking space next to your vehicle Vehicles that the sensors cannot detect due to obstructions Guardrails, walls, signs, parked vehicles and similar stationary objects...
Page 290 4-5. Using the driving support systems When backing up on a slope with a sharp change in grade When backing out of a sharp angle park- ing spot When towing a trailer When there is a significant difference in height between your vehicle and the vehicle that enters the detection area When a sensor or the area around a sensor is extremely hot or cold If the suspension has been modified or tires of a size other than specified...
Page 291 4-5. Using the driving support systems When a vehicle turns into the detection area Situations in which the system may operate even if there is no possibil- ity of a collision Instances of the RCTA function unnecessarily detecting a vehicle and/or object may increase in the following situations: When the parking space faces a street and vehicles are being driven on the...
Page 292 4-5. Using the driving support systems When a detected vehicle turns while approaching the vehicle When there are spinning objects near your vehicle such as the fan of an air conditioning unit When water is splashed or sprayed toward the rear bumper, such as from a sprinkler Moving objects (flags, exhaust fumes, large rain droplets or snowflakes, rain water on the road surface, etc.)
Page 293: Four-Wheel Drive System
4-5. Using the driving support systems Four-wheel drive system Use the front-wheel drive control switch to select the following transfer modes. H2 (high speed position, two- wheel drive) Use this for normal driving on dry - surfaced roads. This position hard gives greater economy, quietest ride and least wear.
Page 294 4-5. Using the driving support systems Shifting between H2 and H4 Shifting from H2 to H4 Reduce the vehicle speed to 100 km/h less than 100 km/h (62 mph). (62 mph) The transfer mode cannot be switched if the vehicle speed is more than 100 km/h (62 mph).
Page 295 4-5. Using the driving support systems Shifting from H4 to H2 Turn the front-wheel drive control switch to H2. The four-wheel drive indicator (Flashes) light flashes while switching. Check that the four-wheel drive indicator light goes off. The four-wheel drive indicator (Goes off) light goes off when switching the transfer mode is completed.
Page 296 4-5. Using the driving support systems Shifting between H4 and L4 Shifting from H4 to L4 Stop the vehicle. The transfer mode cannot be switched if the vehicle is mov- ing. 0 km/h (0 mph) Shift the shift lever to N. Keep the shift lever in N until switching the transfer mode is completed (indicator on).
Page 297 4-5. Using the driving support systems Check that the low speed four-wheel drive indicator light comes on. The low speed four-wheel drive indicator light comes on when switching the transfer mode is completed. Shift the shift lever from N to D or R to drive the vehicle.
Page 298 4-5. Using the driving support systems Turn the front-wheel drive control switch to H4. (Flashes) The low speed four-wheel drive indicator light flashes while switching. If turning the front-wheel drive control switch without following steps , the low speed four-wheel drive indicator light flashes and a buzzer sounds.
Page 299 4-5. Using the driving support systems Four-wheel drive usage frequency You should drive in four-wheel drive for at least 16 km (10 miles) each month. This will assure that the front drive components are lubricated. Shifting between H2 and H4 If you have trouble shifting in cold weather, reduce your speed or stop the vehicle and reshift.
Page 300: Rear Differential Lock System
4-5. Using the driving support systems Rear differential lock system The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or ragged sur- face. This differential lock system is effective in case one of the rear wheels is spinning.
Page 301 4-5. Using the driving support systems Using the rear differential lock system Before using the rear differen- tial lock system, turn the front- wheel drive control switch to L4 and try to move the vehicle. (P. 294) If this is not sufficient, use the rear differential lock system as well.
Page 302 4-5. Using the driving support systems Gently depress the accelerator pedal. Check that the rear differential lock indicator comes on. The rear differential lock indicator (Comes on) comes on when locking the rear differential is completed. If the rear differential lock indicator does not stop flashing after press- ing the rear differential lock switch, perform any of the followings while...
Page 303 4-5. Using the driving support systems Locking the rear differential The following systems do not operate when the rear differential is locked. It is normal operation for the ABS warning light and VSC OFF indicator to be on or for “TRC turned off” to be displayed on the multi-information display at this time.
Page 304: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehi- cle.
Page 305 4-5. Using the driving support systems Trailer Sway Control Helps the driver to control trailer sway by selectively applying brake pres- sure for individual wheels and reducing driving torque when trailer sway is detected. Trailer Sway Control is part of the VSC system and will not operate if VSC is turned off or experiences a malfunction.
Page 306 4-5. Using the driving support systems Vehicles with AUTO LSD system  To turn the TRC/A-TRC systems off, quickly press and release . (The AUTO LSD system turns on. The “AUTO LSD” and VSC OFF indicators will come on. Press again to turn the system back on.
Page 307 TRC, A-TRC and downhill assist control (if equipped) is temporary deacti- vated. If the information continues to show, contact your Toyota dealer. Sounds and vibrations caused by the ABS, brake assist, VSC, Trailer Sway Control, TRC, A-TRC and the hill-start assist control systems...
Page 308 4-5. Using the driving support systems Operating conditions of the hill-start assist control When the following four conditions are met, the hill-start assist control will operate: The shift lever is in a position other than P or N (when starting off forward/ backward on an upward incline) The vehicle is stopped The accelerator pedal is not depressed...
Page 309 4-5. Using the driving support systems WARNING The ABS does not operate effectively when The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). The vehicle hydroplanes while driving at high speed on wet or slick roads. Stopping distance when the ABS is operating may exceed that of nor- mal conditions The ABS is not designed to shorten the vehicle’s stopping distance.
Page 310 The ABS, TRC, A-TRC, VSC, Trailer Sway Control, hill-start assist control and downhill assist control systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
Page 311: Downhill Assist Control System
4-5. Using the driving support systems  Downhill assist control system The downhill assist control system helps to prevent excessive speed on steep downhill slopes. The system will operate when the vehicle is traveling under 30 km/h (18 mph) and transfer mode is in L4 or H4. System operation Press the “DAC”...
Page 312 4-5. Using the driving support systems Operating tips The system will operate when the shift lever is in a position other than P, how- ever to make effective use of the system it is recommended to select a lower shift range. The system will not operate when The transfer mode is in H2.
Page 313 4-5. Using the driving support systems System malfunction In the following cases, have your vehicle checked by your Toyota dealer. The downhill assist control system indicator does not come on when the engine switch is turned to the “ON” position (vehicles without smart entry &...
Page 314: Auto Lsd
4-5. Using the driving support systems  AUTO LSD The AUTO LSD system aids traction by using the traction con- trol system to control engine performance and braking when one of the drive wheels begins to spin. The system should be used only when one of the drive wheels spinning occurs in a ditch or rough surface.
Page 315 4-5. Using the driving support systems If the engine is turned off and restarted The AUTO LSD system and the indicators are automatically turned off. Reactivation of the VSC system linked to vehicle speed When the AUTO LSD system is turned on, the VSC and TRC systems will turn on automatically if vehicle speed increase.
Page 316: Dpf (Diesel Particulate Filter) System
4-5. Using the driving support systems DPF (Diesel Particulate Filter) system When the deposit collected by the filter reaches a predetermined amount, it is automatically regenerated. WARNING During regeneration Observe the following precautions. Failure to do so may result in serious injury such as burns caused by the hot exhaust pipe and exhaust gases, or may cause a fire.
Page 317 4-5. Using the driving support systems Regeneration During normal driving, the filter is automatically regenerated every several hundred kilometers . During regeneration, the DPF system warning message “DPF regeneration in progress” is displayed on the multi-information display. When the amount of accumulated deposit reaches a certain level, regeneration can be performed.
Page 318 4-5. Using the driving support systems DPF system failure warning If the DPF system warning message “DPF full See owner’s manual” appears on the multi-information display, follow the procedure below to regenerate.  When regenerating the filter during driving the vehicle To regenerate the filter, the following driving methods are recom- mended.
Page 319 4-5. Using the driving support systems When regenerating the filter by pressing the DPF system switch  Stop the vehicle in a safe place. Shift the shift lever to P, and firmly set the parking brake. Do not stop the engine. Also, make sure that there are no flammable materials near the exhaust pipe.
Page 320 The malfunction indicator lamp comes on if you continue driving while the DPF system warning message appears on the multi-information display. In this event, damage may be caused to the vehicle or an accident may occur. Have the vehicle inspected by your Toyota dealer immediately.
Page 321: Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 322 If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains Use the correct tire chain size when mounting the snow chains.
Page 323 4-6. Driving tips WARNING Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury. Use tires of the specified size. Maintain the recommended level of air pressure.
Page 324 4-6. Driving tips...
Page 325: Interior Features
Interior features 5-1. Using the air conditioning 5-2. Using the interior lights system and defogger Interior lights list....342 Front manual air • Personal/interior light conditioning system ..324 main switch....343 • Personal/interior Front automatic air lights ......343 conditioning system ..329 • Interior lights....344 Rear manual cooler 5-3.
Page 326: Front Manual Air
5-1. Using the air conditioning system and defogger  Front manual air conditioning system Air conditioning controls Adjusting the settings Adjusting the fan speed setting Turn clockwise (increase) or counterclockwise (decrease). Turning the dial to “OFF” turns off the fan. Adjusting the temperature setting Turn clockwise (warm) or counterclockwise (cool).
Page 327 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time the button is pressed. Defogging the windshield position.
Page 328 5-1. Using the air conditioning system and defogger Heater idle up This feature is used to heat the engine coolant, speed up warming of the cab in cold weather, and keep the cab warm when the vehicle is not moving. Press the switch to turn the heater idle up on/off.
Page 329 5-1. Using the air conditioning system and defogger Adjusting the air flow direction and opening/closing the air outlets  Center outlets  Side outlets Direct air flow to the left or right, up or down. Close the vents. Fogging up of the windows The windows will easily fog up when the humidity in the vehicle is high.
Page 330 5-1. Using the air conditioning system and defogger Ventilation and air conditioning odors To let fresh air in, set the air conditioning system to the outside air mode. During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
Page 331: Front Automatic Air Conditioning System
5-1. Using the air conditioning system and defogger Front automatic air conditioning system  Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Adjusting the fan speed setting Press to increase the fan speed and to decrease the fan speed.
Page 332 5-1. Using the air conditioning system and defogger Changing the air flow mode Press to change the air outlets. outlets used switched each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
Page 333 5-1. Using the air conditioning system and defogger Adjusting the temperature for driver and passenger seats sep- arately (“DUAL” mode) To turn on the “DUAL” mode, perform the following either operation: Press Turn clockwise (warm) or counterclockwise (cool) to adjust the temperature.
Page 334 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time the button is pressed. Defogging the windshield Press The dehumidification function operates and fan speed increases.
Page 335 5-1. Using the air conditioning system and defogger Heater idle up This feature is used to heat the engine coolant, speed up warming of the cab in cold weather, and keep the cab warm when the vehicle is not moving. Press the switch to turn the heater idle up on/off.
Page 336 5-1. Using the air conditioning system and defogger Air outlets Location of air outlets The air outlets and air volume changes according selected air flow mode. Adjusting the air flow direction and opening/closing the air outlets  Center outlets  Side outlets Direct air flow to the left or right, up or down.
Page 337 5-1. Using the air conditioning system and defogger Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 338 5-1. Using the air conditioning system and defogger Ventilation and air conditioning odors To let fresh air in, set the air conditioning system to the outside air mode. During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
Page 339: Rear Manual Cooler System
5-1. Using the air conditioning system and defogger Rear manual cooler system  Adjusting the fan speed setting To adjust the fan speed, slide the fan speed control lever the right (increase) or the left (decrease). Sliding the lever to “OFF” turns off the fan. ...
Page 340 5-1. Using the air conditioning system and defogger Adjusting the air flow direction and opening/closing the air out- lets Direct air flow to the left or right, up or down. Turn the knob fully to the right to close the vent. NOTICE To prevent battery discharge Do not leave the rear cooler system on longer than necessary when the...
Page 341: Rear Automatic Cooler System
5-1. Using the air conditioning system and defogger  Rear automatic cooler system Fan speed is automatically adjusted according to the tempera- ture setting of the front air conditioning system. Air conditioning controls Using the rear cooler system Press on the air conditioning system control panel, or press , or “”...
Page 342 5-1. Using the air conditioning system and defogger Using automatic mode Press (“AUTO” appears on the display). To stop the operation, press Adjusting the air flow direction and opening/closing the air out- lets Direct air flow to the left or right, up or down.
Page 343: Seat Heaters
5-1. Using the air conditioning system and defogger  Seat heaters Turns on the front left seat heater The indicator light comes on. Turns on the front right seat heater The indicator light comes on. The seat heaters can be used when the engine switch is in IGNITION ON mode.
Page 344: 5-2. Using The Interior Lights
5-2. Using the interior lights Interior lights list Interior lights (P. 344) Door courtesy lights (if equipped) Personal/interior lights (P. 343) Outer foot lights (if equipped) Engine switch light...
Page 345: Personal/Interior Light Main Switch
5-2. Using the interior lights Personal/interior light main switch Type A Type B   Door position The personal/interior lights come on when a door is opened. They turn off when the doors are closed. The personal/interior lights can be individually turned on or off. Personal/interior lights ...
Page 346: Interior Lights
5-2. Using the interior lights Interior lights Type A Type B    Type C Door position The interior light comes on when a door is opened. It turns off when the doors are closed.
Page 347 5-2. Using the interior lights Illuminated entry system:  Vehicles without smart entry & start system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are opened/ closed.  Vehicles with smart entry &...
Page 348: 5-3. Using The Storage Features
5-3. Using the storage features List of storage features Bottle holders (P. 349) Auxiliary boxes (P. 350) Console box (P. 347) Glove box (P. 347) Cup holders (P. 348) WARNING Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •...
Page 349: Glove Box
5-3. Using the storage features Glove box Open (push button) Unlock with the master key or the mechanical key Lock with the master key or the mechanical key Glove box light The glove box light turns on when the tail lights are on. Console box Lift the lid while pulling up the knob to release the lock.
Page 350: Cup Holders
5-3. Using the storage features Cup holders Type A Type B   Press in and pull the cup holder. Press down and release the cup holder lid. Type C  Pull the rear armrest down and press in and release the rear cup holder on the armrest.
Page 351: Bottle Holders
5-3. Using the storage features Bottle holders Front doors Rear doors   When using the holder as a bottle holder: • When storing a bottle, close the cap. • The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders.
Page 352: Auxiliary Boxes
5-3. Using the storage features Auxiliary boxes Type A Type B   Press the button. Press in and pull the cup holder, and push the cup tray. Type C Type D   Press in the lid. The auxiliary box is useful for tem- porarily storing sunglasses and similar small items.
Page 353 5-3. Using the storage features Type G  Air conditioning-linked temperature regulation function (type A): By introducing air from the air conditioning system into the auxiliary box, canned drinks etc. can be kept hot or cold. However, as the temperature inside the auxiliary box will become the same as the temperature of the air flowing from the air conditioning system, extreme heating and cooling are not possible.
Page 354 5-3. Using the storage features WARNING When using the auxiliary boxes, do not use the cup tray. If a cup, beverage can or bottle is placed in the auxiliary box, it may be thrown out of the box in the event of an accident or sudden braking, resulting in injury (type B).
Page 355: Other Interior Features
5-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirror (if equipped) Slide the cover to open.
Page 356: Clock
5-4. Using the other interior features Clock The clock can be adjusted by pressing the buttons. Adjusts the hours Adjusts the minutes Rounds to the nearest hour : e.g. 1:00 to 1:29  1:00 1:30 to 1:59  2:00 The clock is displayed when: ...
Page 357: Power Outlets
5-4. Using the other interior features Power outlets The power outlet can be used for the following components: 12 V DC: Instrument panel and rear of console box  Please use as a power supply for electronic goods that use less than 12 V DC / 10 A (power consumption of 120 W).
Page 358 5-4. Using the other interior features 220 V AC (if equipped) Open the cover. The power outlet can be used when:  Vehicles without smart entry & start system 12 V DC: The engine switch is in the “ACC” or “ON” position. 220 V AC: The engine switch is in the “ON”...
Page 359 5-4. Using the other interior features NOTICE To avoid damaging the power outlets, close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit. To prevent blown fuse: ...
Page 360: Grocery Bag Hooks
5-4. Using the other interior features Grocery bag hooks Type A (if equipped) Type B   WARNING Keep the hooks returned in place when not in use (type A). NOTICE Do not hang any object heavier than 4 kg (8.8 lb.).
Page 361: Armrest
5-4. Using the other interior features Armrest Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest. Coat hooks The coat hooks are provided with the assist grips for the second seat.
Page 362: Assist Grips
5-4. Using the other interior features Assist grips An assist grip (type A) can be used to support your body while sitting on the seat. An assist grip (type B) can be used when getting in or out of the vehi- cle and others.
Page 363: Maintenance And Care
Maintenance and care 6-1. Maintenance and care Cleaning and protecting the vehicle exterior ..362 Cleaning and protecting the vehicle interior ...365 6-2. Maintenance Maintenance requirements....368 6-3. Do-it-yourself maintenance Do-it-yourself service precautions ......371 Hood ........373 Engine compartment..375 Tires........386 Tire inflation pressure ..389 Wheels.......391 Air conditioning filter ..393 Wireless remote control/...
Page 364: Maintenance And Care Cleaning And Protecting
6-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 365 Precaution regarding the rear bumper with Blind Spot Monitor (if equipped) If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer.
Page 366 6-1. Maintenance and care NOTICE To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 367: Cleaning And Protecting The Vehicle Interior
6-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 368 6-1. Maintenance and care Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 369 6-1. Maintenance and care NOTICE Cleaning detergents Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 370: 6-2. Maintenance
These are best performed by qualified technicians. Even if you are an experienced do-it-yourself mechanic, we recommend that repairs and maintenance be conducted by your Toyota dealer who will keep a record of maintenance on your vehicle. This record could be helpful should you ever...
Page 371 6-2. Maintenance Where to go for maintenance service? It makes good sense to take your vehicle to your local Toyota dealer for main- tenance service as well as other inspections and repairs. Toyota technicians are well-trained specialists receiving the latest service information through technical bulletins, service tips, and in-dealership training programs.
Page 372 6-2. Maintenance WARNING If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. Handling of the battery Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.
Page 373: Do-It-Yourself Service
• Grease Battery condition • Conventional wrench (for terminal clamp bolts) (P. 380) • Distilled water • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- Engine coolant life hybrid organic acid technology level (P.
Page 374 6-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment Keep hands, clothing and tools away from the moving fan and engine drive belt.
Page 375: Hood
6-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into either of the slots.
Page 376 6-3. Do-it-yourself maintenance WARNING Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot Make sure the rod supports the hood securely from falling down on to your head or body.
Page 377: Engine Compartment
6-3. Do-it-yourself maintenance Engine compartment Engine coolant reservoir Fuse box (P. 399) (P. 379) Battery (P. 380) Engine oil filler cap (P. 377) Washer fluid tank (P. 384) Engine oil level dipstick Intercooler (P. 380) (P. 376) Condenser (P. 380) Fuel filter (P.
Page 378 6-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 379 6-3. Do-it-yourself maintenance Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 380 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 381 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
Page 382 Radiator, condenser and intercooler Check the radiator, condenser and intercooler and clear away any for- eign objects. If any of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING...
Page 383 6-3. Do-it-yourself maintenance Checking battery fluid Check that the fluid level is between the upper line and lower line. Upper line Lower line If the fluid level is at or below the lower line, add distilled water. Adding distilled water Remove the vent plug.
Page 384 Take extra care when connecting the battery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. If a symbol of a battery is shown on the multi-information display There is a malfunction in the vehicle’s charging system.
Page 385 6-3. Do-it-yourself maintenance WARNING Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 386 6-3. Do-it-yourself maintenance NOTICE When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. When adding distilled water Avoid overfilling. Water spilled during battery recharging may cause corro- sion. Washer fluid If any washer does not work, the washer tank may be empty.
Page 387 Fuel filter You may drain the fuel filter yourself. However, as the operation is dif- ficult, we recommend having it drained by your Toyota dealer. Even if you decide to drain it yourself, contact your Toyota dealer. The water in the fuel filter needs to be drained if “Water accumulation in fuel filter See owner’s manual”...
Page 388: Tires
6-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.
Page 389 Front Front To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 10000 km (6000 miles). When to replace your vehicle’s tires Tires should be replaced if: The treadwear indicators are showing on a tire.
Page 390 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 391: Tire Inflation Pressure
Reduced tire life due to wear Reduced safety Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 392 6-3. Do-it-yourself maintenance WARNING Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: Excessive wear Uneven wear Poor handling...
Page 393: Wheels
Used wheels Bent wheels that have been straightened Aluminum wheel precautions (if equipped) Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 394 6-3. Do-it-yourself maintenance WARNING When replacing wheels Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in a loss of handling control. Never use an inner tube in a leaking wheel which is designed for a tube- less tire.
Page 395: Air Conditioning Filter
6-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Vehicles without smart entry & start system: Turn the engine switch to the “LOCK” position. Vehicles with smart entry & start system: Turn the engine switch off. Open the glove box.
Page 396 6-3. Do-it-yourself maintenance Pull out the damper as shown in the illustration, and then remove the glove box. Remove the filter cover. Remove the air conditioning fil- ter and replace it with a new one. The “UP” marks shown on the fil- ter should be pointing up.
Page 397: Wireless Remote Control/Electronic Key Battery
6-3. Do-it-yourself maintenance  Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: Flathead screwdriver Small flathead screwdriver Lithium battery Vehicles without smart entry & start system: CR1620 Vehicles with smart entry &...
Page 398 6-3. Do-it-yourself maintenance Remove the depleted battery. Insert a new battery with the “+” terminal facing up. Vehicles with smart entry & start system  Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
Page 399 Vehicles without smart entry & start system: CR1620 Vehicles with smart entry & start system: CR2032 Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. Replace only with the same or equivalent type recommended by the manu- facturer.
Page 400 6-3. Do-it-yourself maintenance NOTICE For normal operation after replacing the battery Observe the following precautions to prevent accidents: Always work with dry hands. Moisture may cause the battery to rust. Do not touch or move any other component inside the remote control. Do not bend either of the battery terminals.
Page 401: Checking And Replacing Fuses
6-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Vehicles without smart entry & start system: Turn the engine switch to the “LOCK” position. Vehicles with smart entry &...
Page 402 6-3. Do-it-yourself maintenance Under the instrument panel  Remove the cover. Remove the lid. Behind the instrument panel  Remove the glove box (P. 393), and remove the lid.
Page 403 6-3. Do-it-yourself maintenance Behind the cowl side panel  Remove the front passenger’s door scuff plate. Remove the nut and the cowl side panel. Remove the fuse. Only type A fuse can be removed using the pullout tool.
Page 404 Type A, B, C and D: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact your Toyota dealer.  Type A ...
Page 405 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 404) If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
Page 406: Light Bulbs
As there is a danger that components may be damaged, we recommend that replacement is carried out by your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P. 481)
Page 407 6-3. Do-it-yourself maintenance Rear  Without LED rear turn signal  With LED rear turn signal light light Rear turn signal light (if equipped) Back-up light License plate lights...
Page 408 6-3. Do-it-yourself maintenance Replacing light bulbs Front position lights (bulb type) (if equipped) Remove the clips. Removing the clip Installing the clip...
Page 409 6-3. Do-it-yourself maintenance Pull down the cover and turn the bulb base counterclock- wise. Remove the light bulb. When installing, reverse the steps listed.
Page 410 6-3. Do-it-yourself maintenance Front turn signal lights (bulb type) (if equipped) Remove the clips. Removing the clip Installing the clip...
Page 411 6-3. Do-it-yourself maintenance Pull down the cover and turn the bulb base counterclock- wise. Remove the light bulb. When installing, reverse the steps listed.
Page 412 6-3. Do-it-yourself maintenance Rear turn signal lights and back-up lights (without LED rear turn signal lights) Remove the securing bolts and remove the unit. Turn the bulb base counter- clockwise. Back-up light Rear turn signal light Remove the light bulb. Back-up light Rear turn signal light When installing, reverse the steps listed.
Page 413 6-3. Do-it-yourself maintenance Back-up lights (with LED rear turn signal lights) Remove the securing bolts and remove the unit. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 414 6-3. Do-it-yourself maintenance License plate lights Remove the lens. Insert a small flathead screwdriver, etc. into either the right or left hole of the lens. Lens Push the screwdriver side- ways in the direction of the arrow shown in the illustra- tion, disengage the hook, and then remove the lens.
Page 415 6-3. Do-it-yourself maintenance Install the lens. Fit the lens into either the right or left hooks. Push the lens into place. After installation, confirm that the lens is properly installed by gently pulling it. Hooks...
Page 416 6-3. Do-it-yourself maintenance Outer foot lights (if equipped) Press the upper part of the outside rear view mirror to tilt the mirror face upward, and apply protective tape to the lower part of the mirror cover. Insert flathead screw- drivers wrapped in protective tape, and disconnect the tabs behind the mirror.
Page 417 6-3. Do-it-yourself maintenance Fold the mirror forward. Remove the lower cover. Remove the side turn signal light lens. Remove the bulb base.
Page 418 6-3. Do-it-yourself maintenance Turn the cover counterclock- wise and remove it. Remove the light bulb. After installing the new bulb, install the cover clockwise. Install the bulb base. Insert the two claws (left-hand side) or claw (right-hand side) into the hole(s).
Page 419 6-3. Do-it-yourself maintenance Install the side turn signal light lens. Insert the projection into the hole of the lens, and align the lens corner with the plate, as shown in the illustration. Install the lower cover. Return the mirror to its origi- nal position.
Page 420 High mounted stoplight LED lights The following lights consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. Headlights Daytime running lights Front position lights/front turn signal lights (LED type)
Page 421 Condensation build-up on the inside of the lens Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Contact your Toyota dealer for more information in the following situations: Large drops of water have built up on the inside of the lens.
Page 422 6-3. Do-it-yourself maintenance...
Page 423: When Trouble Arises
When trouble arises 7-1. Essential information Emergency flashers ...422 If your vehicle has to be stopped in an emergency.......423 If the vehicle is submerged or water on the road is rising ........425 7-2. Steps to take in an emergency If your vehicle needs to be towed .......427 If you think something is wrong.......433...
Page 424: Emergency Flashers
7-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 425: If Your Vehicle Has To Be Stopped In An Emergency
7-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 426 7-1. Essential information WARNING If the engine has to be turned off while driving Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine. Vehicles without smart entry &...
Page 427: If The Vehicle Is Submerged Or Water On The Road Is Rising
Laminated glass is used in the windshield on this vehicle. Laminated glass cannot be shattered with an emergency hammer Tempered glass is used in the windows on this vehicle. : Contact your Toyota dealer or aftermarket accessory manufacturer for fur- ther information about an emergency hammer.
Page 428 7-1. Essential information WARNING Caution while driving Do not drive on roads where the roads may be submerged or the water may be rising. Otherwise the vehicle may be damaged and cannot move, as well as become flooded and set a drift, which may lead to death.
Page 429: Steps To Take In An Emergency
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 430 7-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front From the rear   Use a towing dolly under the rear Use a towing dolly under the wheels. front wheels. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the...
Page 431 7-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing hooks. This should only be attempted on hard surfaced roads for at most 80 km (50 miles) at under 30 km/h (18 mph).
Page 432 7-2. Steps to take in an emergency Securely attach cables or chains to the towing hooks. Take care not to damage the vehicle body.  Front  Rear Enter the vehicle being towed and start the engine. If the engine does not start, turn the engine switch to the “ON” position (vehicles without smart entry &...
Page 433 7-2. Steps to take in an emergency While towing If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult. WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When towing the vehicle Be sure to transport the vehicle with all four wheels raised off the ground.
Page 434 7-2. Steps to take in an emergency NOTICE To prevent damage to the vehicle when towing using a wheel-lift type truck Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed (vehicles without smart entry & start system) or the engine switch is turned to off (vehicles with smart entry &...
Page 435: If You Think Something Is Wrong
7-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms Fluid leaks under the vehicle.
Page 436: If A Warning Light Turns On Or A Warning Buzzer Sounds
• Malfunction in the brake system • Low negative pressure in the vacuum tank  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. Malfunction indicator lamp (warning buzzer)
Page 437 ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system  Have the vehicle inspected by your Toyota dealer immediately. Power steering system warning light (warning buzzer) Indicates a malfunction in the power steering system ...
Page 438 PCS warning light When a buzzer sounds simultaneously: Indicates a malfunction has occurred in the PCS (Pre-Col- lision System).  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: The PCS (Pre-Collision System) has become temporarily unavailable, corrective action may be necessary.
Page 439 7-2. Steps to take in an emergency Warning light Warning light/Details/Actions Rear passengers’ seat belt reminder lights (warning buzzer) Warn the rear passengers to fasten their seat belts (Flashes or  Fasten the seat belt. illuminates) Low fuel level warning light Indicates remaining fuel is approximately 12.0 L (3.2 gal., 2.6 Imp.gal.) or less ...
Page 440 If the fuel tank is empty, refuel the vehicle imme- diately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer as soon as possible.
Page 441: If A Warning Message Is Displayed
Multi-information display Handling method Follow the instructions of the mes- sage on the multi-information dis- play. If any of the warning messages comes on again after the following actions have been performed, contact your Toyota dealer.
Page 442 Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. System...
Page 443 Move the vehicle to a level surface and check to see if the message goes off. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous.
Page 444 7-2. Steps to take in an emergency If “Differential oil temp high Shift to 2WD mode Cooling time required” or “Differential oil temp high Cooling time required” is shown The differential oil temperature is too high. Turn the front-wheel drive control switch to H2, and reduce the vehicle speed or stop the vehicle in a safe place.
Page 445 Toyota dealer. Continuing to drive the vehicle may be dangerous. If the following messages are shown, there may be a malfunction. Immedi- ately stop the vehicle in a safe place and contact your Toyota dealer. • “Charging System Malfunction Stop in a Safe Place”...
Page 446 7-2. Steps to take in an emergency WARNING If warning light comes on or a warning buzzer sounds when a warning message is shown Check an follow the message shown on the multi-information display. Fail- ure to do so may result in death or serious injury. NOTICE While the engine oil level warning is shown Continued engine operation with low engine oil will damage the engine.
Page 447: If You Have A Flat Tire
7-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 386 WARNING If you have a flat tire Do not continue driving with a flat tire.
Page 448 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Spare tire Tool bag Jack...
Page 449 7-2. Steps to take in an emergency WARNING Using the tire jack Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 450 7-2. Steps to take in an emergency Taking out the jack and tool bag Remove the cover. Unhook the strap and take out the tool bag. Take out the jack. For loosening For tightening...
Page 451 7-2. Steps to take in an emergency Taking out the spare tire Assemble the jack handle end, jack handle extensions and wheel nut wrench. To assemble the jack handle extension and wheel nut wrench, push in the projection on the jack handle extension.
Page 452 7-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 453 7-2. Steps to take in an emergency Type C  Slightly loosen the wheel nuts (one turn). Assembling the jack handle. (P. 449) Position the jack at the jack points as shown. Front Under the cross member Rear Under the rear axle housing...
Page 454 7-2. Steps to take in an emergency Raise the vehicle until the tire is slightly raised off the ground. When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing. Remove all the wheel nuts and the tire.
Page 455 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 456 7-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 457 7-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 105 N•m (10.7 kgf•m, 77 ft•lbf) Vehicles with spare tire of the same wheel type as the installed tires: Reinstall the wheel ornament.
Page 458 7-2. Steps to take in an emergency Type C  WARNING Stowing the flat tire Failure to follow steps listed under stowing the tire may result in damage to the spare tire carrier and loss of the tire, which could result in death or seri- ous injury.
Page 459 7-2. Steps to take in an emergency Raise the tire. To protect the wheel design faces, place rags between the wheel design faces and the frame. While raising, secure the tire, tak- ing care that the tire goes straight up without catching on any sur- rounding part, to prevent it from fly- ing forward during a collision or sudden braking.
Page 460 7-2. Steps to take in an emergency Flat tire Repair or replace the flat tire as soon as possible. When stowing the repaired or replaced tire to the carrier, remove the rags that are protecting the wheel design faces. WARNING After using the tools and jack Before driving, make sure all the tools and jack are securely in place in their storage location to reduce the possibility of personal injury during a collision...
Page 461: If The Engine Will Not Start
7-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce-  dures are being followed ( P. 183, 186), consider each of the following points: The engine will not start even though the starter motor operates normally.
Page 462 There may be a malfunction in the steering lock system. (vehicles with smart entry & start system) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with smart entry & start sys-...
Page 463: If The Electronic Key Does Not Operate Properly (Vehicles With Smart Entry & Start System)
7-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart entry & start system) If communication between the electronic key and vehicle is interrupted (P. 134) or the electronic key cannot be used because the battery is depleted, the smart entry &...
Page 464 A message indicating how to start the engine will be displayed on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer. Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine.
Page 465: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 466 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 467 • If the 20 hour rate capacity is low, even if the time period where the vehi- cle is not used is a short time, the battery may discharge and the engine may not be able to start. For details, consult your Toyota dealer. WARNING When removing the battery terminals Always remove the negative (-) terminal first.
Page 468 When exchanging the battery When the vent plug and indicator are close to the hold down bracket, the battery fluid (sulfuric acid) may leak. For information regarding battery replacement, contact your Toyota dealer. NOTICE When handling jumper cables When connecting the jumper cables, ensure that they do not become entan-...
Page 469: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radiator) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer.
Page 470 Start the engine to check that the radiator cooling fan operates and to check for coolant leaks from the radiator or hoses. If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 471 7-2. Steps to take in an emergency WARNING When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. If steam is seen coming from under the hood, do not open the hood until the steam has subsided.
Page 472: If You Run Out Of Fuel And The Engine Stalls
If the engine does not start after the above steps have been performed, wait for 10 seconds and try steps again. If the engine still does not start, contact your Toyota dealer. After starting the engine, depress the accelerator pedal lightly until the engine runs smoothly.
Page 473: If The Vehicle Becomes Stuck
7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow or sand from around the stuck tire.
Page 474 7-2. Steps to take in an emergency  Vehicles with AUTO LSD system WARNING When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 475: Vehicle Specifications
Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)...474 Fuel information ....482 8-2. Customization Customizable features ..483 8-3. Initialization Items to initialize ....489...
Page 476: Specifications Maintenance Data
8-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions Overall length 4795 mm (188.8 in.) Overall width 1855 mm (73.0 in.) Overall height 1835 mm (72.2 in.) Wheelbase 2750 mm (108.3 in.) Front tread 1540 mm (60.6 in.) Rear tread 1555 mm (61.2 in.) : Unladen vehicle...
Page 477 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the rear right frame.
Page 478 8-1. Specifications Engine Model 1GD-FTV 4 cylinder in line, 4 cycle, diesel Type (with turbocharger) 92.0  103.6 mm (3.62  4.08 in.) Bore and stroke Displacement 2755 cm (168.1 cu.in.) Valve clearance Automatic adjustment Drive belt tension Automatic adjustment Fuel Fuel type Diesel fuel that contains 10 ppm or less of sulfur...
Page 479 8-1. Specifications Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used. Oil grade: 0W-20: ACEA C5...
Page 480 9.5 L (10.0 qt., 8.4 Imp.qt.) Fluid type Toyota Genuine ATF WS : The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. NOTICE Automatic transmission fluid type Using transmission fluid other than the above type may cause abnormal...
Page 481 Recommended oil viscosity SAE 75W : Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent oil of matching quality that satisfies the above specifications.
Page 482 8-1. Specifications Chassis lubrication Lithium base chassis grease, Spider NLGI No.2 Molybdenum-disulfide lithium Front Propeller base chassis grease, NLGI No.2 Slide yoke shafts or lithium base chassis grease, NLGI No.2 Lithium base chassis grease, Rear Spider NLGI No.2 : With grease fitting only Steering Free play Less than 30 mm (1.2 in.)
Page 483 8-1. Specifications Light bulbs Light bulbs Type Front position lights (bulb type) Front turn signal lights (bulb type) Rear turn signal lights (without LED rear turn signal lights) Exterior Back-up lights License plate lights Outer foot lights Interior lights (type A and B: P. 344) Personal/Interior lights (type A: P.
Page 484: Fuel Information
5% FAME content (B5) will damage the vehi- cle’s fuel system. You must ensure that refueling is carried out only from a source where fuel specification and quality can be guaranteed. In case of any doubt, ask your Toyota dealer.
Page 485: Customization
Toyota dealer. Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Customizing vehicle features Changing using the multi-information display...
Page 486 Settings that can be changed using navigation system or multime- dia system Settings that can be changed using the multi-information display Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, – = Not available Gauges, meters and multi-information display (P. 94)
Page 487 8-2. Customization : For details about each function: P. 94 : Some status screens cannot be registered (indicated on multi-information display). : Customized items are the following items except for default setting items: current fuel economy (bar type), current fuel economy (value type), aver- age fuel economy (after reset), average fuel economy (after start), average fuel economy (after refuel), average speed (after reset), average speed (after start), elapsed time (after reset), elapsed time (after start), distance...
Page 488 8-2. Customization RSA (Road Sign Assist) (P. 244) Customized Function Default setting setting RSA (Road Sign Assist) – – No notification – – Excess speed notification Display only Display and method – – buzzer 3 km/h (2 mph) – – Excess speed notification 1 km/h (1 mph) level...
Page 489 Power back door system (P. 118) Customized Function Default setting setting Power back door system – – : If equipped Toyota parking assist-sensor (P. 272) Customized Function Default setting setting Detection distance of the Long Short – rear center sensor...
Page 490 8-2. Customization Turn signal lever (P. 201) Customized Function Default setting setting Times of flashing of the – – lane change signal flashers WARNING During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
Page 491: Initialization
8-3. Initialization Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery is reconnected, or mainte- nance is performed on the vehicle. Item When to initialize Reference After reconnecting or chang- Power back door ing the battery, or changing a P.
Page 492 8-3. Initialization...
Page 493: Index
Index What to do if... (Troubleshooting) .....492 Alphabetical index ......496 Refer to the “Navigation and Multimedia System Owner’s Manual” or “Multimedia Owner’s Manual” for information regarding the equipment listed below. • Navigation system • Audio system • Rear view monitor system •...
Page 494 You lose your keys If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 110) Vehicles with smart entry & start system: If you lose your electronic keys, the risk of vehicle theft increases signifi- cantly.
Page 495 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without smart entry & start system) Is the shift lever in P? (P. 183) Is the steering wheel unlocked? (P. 184) Is the battery discharged? (P. 463) The engine does not start (vehicles with smart entry &...
Page 496 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped Vehicles without smart entry & start system: It is locked to prevent theft of the vehicle if the key is removed from the engine switch. (P. 184) Vehicles with smart entry &...
Page 497 What to do if... (Troubleshooting) An alarm is activated and the horn sounds (if equipped) Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (P. 80) To stop the alarm, turn the engine switch to the “ON” position (vehicles with- out smart entry &...
Page 498: Alphabetical Index
Alphabetical index Alphabetical index Side airbag operating conditions ......41 A/C........324, 329 Side airbag precautions ..38 Air conditioning filter....393 Side and curtain shield Front automatic airbags operating air conditioning system ..329 conditions ......41 Front manual Side and curtain shield air conditioning system ..
Page 499 Alphabetical index Back door Care Back door......118 Exterior ......... 362 Wireless remote control ..109 Interior........365 Back-up lights Seat belts......366 Replacing light bulbs..410, 411 Wheels........363 Wattage......... 481 Chains........320 Battery Child restraint system....52 Battery checking ....380 Child restraint system If the vehicle battery is installation method ....
Page 500 Alphabetical index Display Child-protectors....... 116 Cleaning......362, 365 Dynamic radar cruise Exterior........362 control......... 248 Interior........365 LDA (Lane Departure Seat belts ......366 Alert with Yaw Assist Wheels ........363 Function) ......239 Clock ......... 354 Multi-information display ..94 Trip information.......
Page 501 Alphabetical index Engine “ACC” position ...... 183 Eco Driving Indicator ACCESSORY mode ..... 187 Light........87, 90 Compartment ......375 EDR (Event data recorder) ..8 Engine switch....183, 186 Electronic key Hood ........373 If the electronic key does How to start the engine..183 not operate properly ...
Page 502 Alphabetical index Front automatic air conditioning Engine switch (ignition switch).....183, 186 system Auto power off function ..188 Air conditioning filter ..... 393 Changing the engine Front automatic air switch modes...... 187 conditioning system.... 329 Changing the engine Front passenger occupant switch position ....
Page 503 Alphabetical index Gauges........91 Identification Glove box ......... 347 Engine........475 Grocery bag hooks ....358 Vehicle ........475 Ignition switch (engine switch) ....183, 186 Auto power off function ..188 Head restraints......147 Changing the engine Headlights ........ 203 switch modes......
Page 504 Alphabetical index Jack LDA (Lane Departure Alert Vehicle-equipped jack... 446 With Yaw Assist Function) ... 233 Jack handle ......449 Warning message....243 Jam protection function Lever Power back door ....125 Auxiliary catch lever....373 Power windows ..... 156 Hood lock release lever ..
Page 505 Alphabetical index Maintenance Navigation system Do-it-yourself maintenance ....... 371 Maintenance data ....474 Odometer........91 Maintenance requirements....... 368 Differential oil ......479 Malfunction indicator lamp ..434 Engine oil ......476 Master warning light....437 Transfer oil......479 Meter Opener Indicators ........
Page 506 Alphabetical index Paddle shift switches ....196 Radar cruise control Parking assist sensors (dynamic radar cruise (Toyota parking control)........248 Radiator ........380 assist-sensor) ......272 Parking brake RCTA (Rear Cross Traffic Operation ......202 Alert) function......282 Parking brake indicator Rear cooler system ..
Page 507 Alphabetical index Toyota Safety Sense .... 216 Service reminder indicators ..84 Seat belts........28 Shift lever Adjusting the seat belt.....31 Automatic transmission..192 Child restraint system If the shift lever cannot be installation......52 shifted from P ..... 199 Cleaning and maintaining Shift lock system .....
Page 508 “SOS” button ......73 switch......325, 332 Toyota parking Rear window wiper and assist-sensor ......272 washer switch ..... 210 Toyota Safety Sense ....215 “SOS” button ......73 Traction control ....... 302 Toyota parking Trailer towing ......173 assist-sensor ...... 272 Transmission VSC OFF switch ....
Page 509 Windshield wipers RCTA (Rear Cross Intermittent windshield Traffic Alert) ......282 wipers ......... 208 Seat belt reminder....436 Winter driving tips ....319 Toyota parking Wireless remote control assist-sensor ...... 275 key .......... 109 Warning lights Locking/Unlocking....109 ABS........435 Replacing the battery....
Page 510 Certification Blind Spot Monitor...
Page 514 GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 373 P. 214 Hood lock release Fuel filler door opener Tire inflation pressure lever P. 373 P. 214 P. 480 Fuel tank capacity (Reference) 80 L (21.1 gal., 17.6 Imp.gal.) Diesel fuel that contains 10 ppm or Fuel type less of sulfur...

Toyota FORTUNER 2021 Owner's Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Toyota FORTUNER 2021

Summary of Contents for Toyota FORTUNER 2021

Table of Contents