Fixed With A Seat Belt - Toyota FORTUNER 2021 Owner's Manual

Child restraint system fixed with a seat belt
Installing child restraint system using a seat belt
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If the child restraint system on hand is not within the "universal" cat-
egory (or the necessary information is not in the table), refer to the
"Vehicle List" provided by the child restraint system maker for vari-
ous possible installation positions, or check the compatibility after
asking the retailer of the child restraint system. (P. 58, 59)
If installing the child restraint system to the front passenger seat
1
is unavoidable, refer to P. 54 for front passenger seat adjustment.
Adjust the seatback angle to the most upright position. When
2
installing a forward-facing child seat, if there is a gap between
the child seat and the seatback, adjust the seatback angle until
good contact is achieved.
If the head restraint interferes with the child restraint system
3
installation and the head restraint can be removed, remove the
head restraint. Otherwise, put the head restraint in the upper
most position. (P. 147)
Run the seat belt through the
4
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Securely
fix the seat belt to the child
restraint system in accor-
dance to
enclosed with
restraint system.
the directions
the child
1-2. Child safety
65
1