Toyota FORTUNER 2021 Owner's Manual page 228

226
4-5. Using the driving support systems
Changing settings of the pre-collision system
Enabling/disabling the pre-collision system
The pre-collision system can be
enabled/disabled on
(P. 98) of the multi-informa-
tion display.
The system is automatically
enabled each time the engine
switch is turned to the "ON"
position (vehicles without smart
entry & start system) or IGNI-
TION ON mode (vehicles with
smart entry & start system).
If the system is disabled, the PCS warning light will turn on and a
message will be displayed on the multi-information display.
Changing the pre-collision warning timing
The pre-collision warning timing
can be changed on
(P. 98) of the multi-informa-
tion display.
The warning timing setting is
retained when the engine switch
is turned to the "LOCK" position
(vehicles without smart entry &
start system) or off (vehicles
with smart entry & start system).
However, if the pre-collision sys-
tem is disabled and re-enabled,
the operation timing will return to
the default setting (middle).
Early
1
Middle
2
This is the default setting.
Late
3