Case CX14 Operator's Manual page 19

E. WARM UP MACHINE BEFORE OPERATION
Take a sufficient time to warm up the machine,
especially at cold season, otherwise the
response of machine against the operation of
operating lever is delayed which may cause
injury and / or machine damage.
F. CONFIRM OPERATING CONTROL PATTERN
Slowly operate the control levers to confirm the
operating patterns in advance. Make sure the
operation control pattern is according to the
indication plate.
G. CONFIRM TRAVEL DIRECTION
Make certain of the location of the travel motors
before operating travel.
Pay attention that in the case where the travel
motors are in the front side, the travel function
is reversed.
Sound horn before moving the machine to
inform any personnel around the machine that
the machine is now in operation.
H. DO NOT HIT THE CAB WITH ATTACHMENT
Check clearance between bucket and cab
before operation. Slowly cycle bucket, check for
interference with arm and cab, particularly if a
lifting eye is welded on bucket bottom. Exercise
care when operating the bucket near the cab.
1-12
SECTION 1 - SAFETY PRECAUTIONS
CONDITION WHERE THE TRAVEL
DIRECTION IS REVERSED
TRAVEL
MOTOR
PAE-1-10
PV1-27
TRAVEL
DIRECTION
PV1-28
CAUTION FOR
INTERFERENCE
PV1-29