Table of Contents
Advertisement
I . SIGNS, SIGNALS & FLAGMEN
Install signs on soft shoulders and ground
areas, have a flagman direct the operation if
necessary. The operator should note marks and
follow signals from the flagman. All personnel
should know the meaning of the signs, marks,
and signals. Only one flagman should give the
signs and signals.
J. KEEP FIRE AWAY FROM FUEL AND OIL
Oil, antifreeze, and especially fuel are highly
flammable. Never use fire near the machine.
Securely tighten all fuel and oil caps. Keep fuel
and oil in the designated storage areas.
Promptly clean up any all spills and dispose of
waste properly.
K. SURELY INSTALL SAFEGUARD
Confirm that all guards and covers are securely
and properly installed. If damaged, immediately
restore them to proper condition.
Do not operate the machine without guards or
covers. Make sure to maintain them in normal
condition.
L. MOUNTING & DISMOUNTING MACHINE
When getting on and off the machine, always
maintain three point contact by using the
handrails and step. Inspect and clean
handrails, step, and mounting parts. Remove
slippery materials, such as lubricants, and mud.
Always place the cab entrance parallel to the
tracks (crawlers) before stopping the engine
for dismounting.
SECTION 1 - SAFETY PRECAUTIONS
PV1-08
PV1-09
PV1-10
PVK1-11
1-7
Advertisement
Table of Contents
