Table of Contents
Advertisement
CARE AND MAINTENANCE
REPLACING THE CUTTING BLADE
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the
cutting edges with rags or other materials when performing any maintenance
on the blades. ALWAYS remove the battery when servicing or transporting the
mower.
REMOVE BATTERY
While wearing leather padded gloves, wedge a block of wood between the blade and the mower
deck in order to prevent the blade from turning when the bolt (1) is being removed.
•
Using an adjustable wrench or 27 mm socket, loosen the bolt (1) and remove the blade (2).
Turn the bolt "COUNTERCLOCK WISE" to loosen it and "CLOCKWISE" to tighten it.
•
Remove the bolt (1) and the blade (2).
•
To re-install the blade, position the blade with the cutting edges toward the ground.
Assemble the bolt as shown. Using a 27 mm socket or wrench, turn the blade nut
"CLOCKWISE" in order to secure the blade.
NOTE: Be sure to replace the parts in the exact order in which they were removed. When
installing the cutting blade, verify that it is installed with the curved ends pointing toward the
mower deck, and not toward the ground.
21
EN
2
1
Advertisement
Table of Contents
