Piping And Drain Hose Installation - Toshiba MMK-UP0051DHPL-E(TR) Service Manual

6

PIPING AND DRAIN HOSE INSTALLATION

Piping and drain hose forming
• Since dewing results in a machine trouble, make sure to insulate both connecting pipes.
(Use polyethylene foam as insulating material.)
• The connection of pipes can be installed in the following directions.
Rear right
Rear left
Bottom left
Bottom right
• Rear right
Drain hose
• Bottom right
Drain hose Cut out
Front panel slit
1. Die-cutting Front panel slit
• Cut out the slit on the bottom left or bottom right side of the Front panel for the bottom left or
bottom right connection with a coping saw.
2. Changing drain hose
• The factory default of the drain hose is installed on the right side.
• For bottom-leftward connection and rear leftward connection's piping, it is necessary to change
the drain hose and drain cap.
• Rear left
• Bottom left
Cut out
Front panel slit
- 108 -
Drain hose
Drain hose