Toshiba MMK-UP0051DHPL-E(TR) Service Manual page 51

Confirming the indoor unit addresses and the position of an indoor unit
using the remote controller
Confirming the numbers and positions of indoor units
To know the indoor unit addresses though position of the indoor unit is recognized
When the unit is individual (the indoor unit is paired with a wired remote controller one-to-one),
or it is a group-controlled one.
<RBC-AMTU >
(Execute it while the units are running.)
1
ON / OFF
Push the
UNIT LOUVER
2
Push the button (left side of the button).
1-1 1-1 1-1 1-1 1-1
A unit numbers is indicated on the LCD (it will disappear after a few seconds). The indicated number shows the
system address and indoor unit address of the unit.
When 2 or more indoor units are connected to the remote controller (group-controlled units), a number of other
connected units appears each time you push the
<RBC-ASCU11- >
There is no such function in the remote controller.
TEMP.
TIMER SET
TIME
FILTER
RESET TEST SET CL
button if the units stop.
ON / OFF
1
Starts
FAN MODE
running
SAVE VENT
SWING/FIX UNIT LOUVER
2
UNIT LOUVER
button (left side of the button).
- 51 -