Automatic Digital Code Security - Uniden XCI-600 Operating Manual

Automatic Digital Code Security
To avoid unauthorized calls on your phone, a
Digital Code feature was added to the
XCI-660
phone. This Digital
Code
is shared only between
the Handset and Base Unit. The Code is set
automatically when you first use the phone.
*
Please refer to the foldout in front of your
operating guide for key positions.
To change the Digital Code, be sure the Handset is
on the Base, then:
1. Remove the Handset from the Base Unit.
2. Press the page/find
button on the Base
Unit.
3. Place the Handset
back on the Base
Unit while it's still
beeping.
""". .-n__--___------.
4. When the beeping stops, briefly remove the
Handset again, and then return it to the Base
Unit.
5. The Battery icon will
blink to indicate that
TI]TAL
CALL::.
the Digital Security 1~3
Code is set to one of
the more than
65,000 codes.
27