Switching The Kds-100; Sending/ Receiving A Message; Receiving A Message; Message Receipt Display - Kenwood KDS-100 Technical Document

3. KDS-100 Operation
∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨ keys
Press to scroll the display. When the Message List
is displayed, use these keys to select the list.
You can find detailed operational information at each
mode description.
3.2.4. Switching the KDS-100 power
OFF
Switch the attached transceiver's power OFF to turn
OFF the KDS-100. You do not need to save the data
when you turn off the KDS-100.

3.3. Sending/ Receiving a message

3.3.1. Receiving a message

The KDS-100 allows you to view received messages
from other terminals.

3.3.1.1. Message receipt display

When a new message is received, the terminal will
emit a beeping sound and the LED will flash
orange. You can disable these functions using the
FPU. {Refer to 4.2.3.3.}
message receipt displays available in the KPG-71D
configuration.
The current display switches into the Message
receipt display or the New message receipt icon
appears in the right corner of the display.
4.2.3.3.}
This display appears when you configure the
received message to appear automatically. This
display shows the time the message was sent, the
sender of the message, the message number, and
the first few lines of the message.

3.3.1.2. Operations at message receipt

You can perform two operations on this display
{Refer to 5}. Press MENU to return to the previous
display or press [OK] to read the entire message.
The following display is a Message List display.
This display allows you to view the entire message.
When reading the messages, depending on its
8
There are two types of
{Refer to
size, you may have to scroll to view the entire
message. Use the ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ keys to scroll up and
down the display. Scroll down when ∨ ∨ ∨ ∨ appears and
scroll up when ∧ ∧ ∧ ∧ appears.
When you finish reading the message, press
MENU to enter Menu mode or SEL to enter
Message List mode.
Conditions that the new message is sorted to the
message to be read or the already read message.
Conditions that the new message is sorted to the
message to be read until you read it at the
Message List mode:
z
Display a new message upon receipt is not
selected in the Optional Features.
Edit → FleetSync → Status List: Exiting from
z
the Message List Mode without pressing the ∧ ∧ ∧ ∧
and ∨ ∨ ∨ ∨ keys, or function key [1] when Quick
Status Response Key is not assigned.
Edit → FleetSync → Status List: Exiting from
z
the Menu Mode without pressing the ∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨
keys, or the key assigned to Quick Status
Response when Quick Status Response Keys
are assigned.
Condition that the new message is sorted to the
already read message:
z
When checking the message at the Message
List mode.
When pressing the ∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨ keys, or the
z
function key [1] when Display a new message
upon receipt is available and Quick Status
Response Keys are not assigned.
When pressing the ∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨ keys, or the key
z
assigned to Quick Status Response when
Display a new message upon receipt is
available and Quick Status Response Keys
are assigned.
Note: You can respond and directly make a Status call from
this display by configuring "Quick Status Response Keys" in the
KPG-71D. When you directly respond to the message, press
the function key that you assigned the Status call in the
KPG-71D. {Refer to 4.2.3.3.}

3.3.2. Send a message

The KDS-100 allows you to send the message to other
terminals or TK-x80 series transceivers.

3.3.2.1. Status call and Sel. call

There are two types of transmission methods:
Status calls and Selective calls.
Status call: You can send pre-registered messages
to selected recipients. The receiving party's terminal
displays the sender of the message, the time the
message is received, and the message number.
Note: TK-x80 series transceivers do not have the function
to display the time.