Table of Contents
Advertisement
3-10.
L GUIDE LEVER ASSEMBLY AND
LOAD LEVER ASSEMBLY
(See Figs.3-10-1)
assembly @ and the L guide lever spring ®.
ASSEMBLY NOTES:
1)
Apply grease (VHJ-0100) to the toothed area @) of the
L guide act lever assembly © and around the shafts
@ and @.
Remove the BT spring @.
Remove
the
clamp@® on
the
underside
of the
mechanism
chassis,
then
remove
the
BT lever
assembly @).
Remove the clamp © on the band brake assembly @.
Then, as shown in Fig. A, align the other end of the
band brake assembly with the protruding parts of the
BT lever assembly @) before removing it.
ASSEMBLY NOTES:
1.
When fitting the BT lever assembly @), be careful notto
bend
the stopper© or the S incline
mounting
3)
4)
5)
fi
8 /
_—
OShatt
(2Cam groove
8
©
@
&
a
Stopper
a
Pa
Fig.3-10-1
@BT sprin
mounting
assembly
g—
©Stopper
a"
@Clamp
Fig.3-11-1
Advertisement
Table of Contents
