Advertisement
PANEL FACILITIES
@® RF modulator terminal (TO RF MODULATOR)
The video playback signal from the video components con-
nected to this unit are output here, thus allowing the playback
to be viewed on a television set. When using a normal televi-
sion set not equipped with video input terminal, connect this
terminal to the terminal of an RF modulator (available commer-
cially), and connect the RF modulator to the television set.
NOTE:
The television set connected to the RF MODULATOR terminal will
play back only the video image, with the result that sound must
be played back using the stereo amplifier. When using the televi-
sion set alone, use an RF selector switch (available commercial-
ly}, and connect the television antenna directly to the television
set.
@® Power cord:
Connect to a household wall outlet, or the power outlet of an
audio timer.
) AC OUTLETS (SWITCHED)
Other components
may
be connected
to these outlets, so
fong as their combined power consumption does not exceed
the limits noted on the panei.
{REMOTE CONTROL TOTAL 500 W MAX}
Power to the components connected to these outlets can be
controlled by the ampiifier's stand-by key, or by the POWER
key on the remote contro! unit.
Do not connect components with combined power consump-
tion exceeding 500 W.
[500 W MAX]
Power to the component connected to this outlet is controlied
by the amplifier's POWER switch.
Do not connect any component with power consumption ex-
ceeding 500 W.
About power consumption of power outlets.
Never connect any appliance (e.g. toaster, hair dryer, etc.) with a
power
consumption
greater
than
the
wattage
shown
on the
panel, Fire or damage te components could result.
ea
<ARB1140>
Advertisement
