Advertisement
PANEL FACILITIES
FRONT PANEL
@ MAIN POWER switch
STANDBY switch/indicator
« When the power switch is in the ON position, power can be
turned
ON/OFF
to the
amplifier and
to the rear
panel
REMOTE CONTROL power outlets.
Power is turned ON/OFF alternately with each press of the
switch; when in the OFF (stand-by) position, the indicator
will light (when in the ON position, the indicator will flash,
then go out).
The accessory remote control unit can be used to turn this
switch ON/OFF, with the result that the remote control unit
can be used from the listening position to control power not
only to the amplifier, but also to those components con-
nected to the rear pane! REMOTE CONTROL power outlets.
* When
not using the amplifier for an extended period of
time, be sure to set the main power switch to the OFF posi-
tion.
@ VIDEO SIGNAL SELECTOR switch
Use to switch the video component's video signal regardless
of the position of the input selector switch. The video in-
dicators (green) above the input selector switch will light in
order.
Even when listening to an audio component (record player,
tuner, etc.}, this switch can be used to perform video recor-
ding and playback while continuing to listen to the audio com-
ponent playback.
@ VIDEO INPUT selector switches/indicators
Use to select the video component for playback.
{vDP]—————_
To play back the video disc player connected
to the rear panel VDP terminals.
{VCR}
To play back the VCR connected to the rear
panel VCR1 terminals.
IVCR2]
-
To play back the VCR connected to the front
panel VCR2 terminals.
20
<ARB1140>
Front panel door
Press lower side SS
{VCR3)
—~
To play back the VCR connected to the rear
panel VCR3 terminais.
{TV tuner] ——
To use the TV tuner connected to the rear
panel TV TUNER terminais.
The red indication light during audio playback, while the green in-
dicators light during video playback.
This switch is interlocked with the AUDIO INPUT selector.
@® AUDIO INPUT selector switches/indicators
Use to select the audio component for playback (the indicator
will light).
{CD}:
For compact disc player.
{Phono}:
For turntable.
{Tuner}:
For listening to FM/AM broadcasts with a tuner.
{Tape 1]:
To use the tape deck connected to the rear panel
Tape 1 terminals.
{Tape 2]:
To use the tape deck connected to the rear panel
Tape 2 terminals.
The Tape 1 and 2 switches go ON or OFF alternately each time
they are pressed, independently of the other switches.
@) VOLUME control
Use to adjust the sound volume. At the [o>] position, sound
will not be heard, while at the [0] position, sound volume will
be at its maximum.
@® REMOTE SENSOR/indicators
@ VIDEO ADAPTOR
switch/indicator
Set to the ON position when using the component connected
to the rear panel ADAPTOR terminais VIDEO IN and OUT.
Advertisement
