Download Print this page

Pioneer C-90S Operating Instructions Manual page 21

Stereo control amplifier

Advertisement

PANEL FACILITIES
eae
Repbronee Contied laglaion
MONITOR OUT lights:
The image enhanced with the adaptor component can be
played back on the color monitor or TV connected to the
MONITOR OUT terminal or RF MODULATOR terminal.
REC OUT fights:
The image enhanced with the adaptor component can be
played back on the color monitor connected to the REC
MONITOR
terminal
or
the
VIDEQ
OUT
terminal
of
VCR1-3.
@ AUDIO ADAPTOR switch/indicator
Normally feave in the OFF position.
Set to ON when
using the audio adaptor component
con-
nected to the rear panel adaptor terminals AUDIO 1N/OUT [in-
dicator lights).
@ REC SELECTOR switch/indicators
NOTE:
4@ TAPE COPY switch/indicators
Use when performing tape copying between the tape decks
connected to the TAPE1, and TAPE2 terminals.
1 B® 2: To copy the Tape 1 playback onto Tape 2.
2 ® 1: To copy the Tape 2 playback onto Tape 1.
(1) MODE selector switch/indicator
Use to select the stereo or monaural audio playback mode.
Normally, this switch is not used.
When
the monaural
playback
mode
is selected,
press this
switch; the MODE MONO
indicator will light:
42 Cartridge selector switch/indicators
(PHONO SELECTOR):
Set in accordance
with the type of cartridge used on your
record player {the corresponding indicator will light).
{MM}
——-
Set here when using a moving magnet car-
tridge, or a high-output (ImV or more) mov-
ing coil (MC) cartridge.
[MC 40Q]—-—--
Set here when using a moving coil cartridge
with impedance of 40 ohms.
[MC 32]
Set here when using a MC cartridge with im-
pedance of 3 ohms.
(3 FILTER switches/indicators
SUBSONIC
When the switch is pressed to the ON position, the indicator
lights and the subsonic filter acts to cut out all frequencies
below 7 Hz.
HIGH FILTER
When the switch is pressed to the ON position, the indicator
lights and the high-cut filter acts to eliminate all frequencies
above 10 kHz.
MUTING switch/indiator
Use to temporarily reduce the sound volume to — 20 dB nor-
mal. The muting function is on when the MUTING
indicator
lights. Press the switch again to turn the muting function off
and return the sound volume to the normal level.
21
<ARBI140>

Advertisement

loading