Advertisement
USE OF LEARNING FUNCTIONS
QUESTIONS
AND
ANSWERS
ABOUT
THE
LEARNING FUNCTION
A: Hold one of the keys on the programmable remote con-
trol unit depressed (for example the VCR @ key) until the
LEARN indicator lights up, and then press the two keys on
the VCR remote contro! simultaneously.
Q: The remote control unit of my VCR has a REC (recor-
ding) key and a PLAY (playback) key and they both have to
be pressed at the same time to start recording. What is the
learning procedure in this case?
OPERATING OTHER EQUIPMENT BY THE PRO-
GRAMMABLE REMOTE CONTROL UNIT
NOTE:
* When operating programmed keys, always set the LEARN
switch to the USE position. Operation is not possible in the
LEARN position.
* For functions which require two keys to be pressed at the
same time (recording etc.) or functions for which several
codes are sent simultaneously (auto functions, timer pro-
gramming,
etc.) the programming
procedure is different
and improper operation may occur.
RETURNING TO THE INITIAL SETTINGS
1. Set the LEARN selector switch to the LEARN position.
2. Remove the battery cover.
Cover
3. Press any of the keys available for programming. The LEARN
indicator will illuminate.
4. Use a ball-point pen or simitar object to press the RESET key
while the LEARN indicator is flashing.
Reset button
* The programmed functions for the AUDIO, VIDEO and AUX
positions are cleared, and theremote control unit is reset to
the Pioneer uniform remote contro! codes.
* Press the button gently; do not use excessive force.
19
<ARB1140>
Advertisement
