HandyTrac Touch Installation & Operation Manual page 5

Mount the HandyTrac Touch
1. Hold the Touch keypad flush against the
side of the cabinet. The Electronic Lock
port on the side of the cabinet must be
aligned with the electronic lock cables from
the keypad.
2. Before mounting the keypad, gently feed
the electronic lock cables through the
electronic lock cable port on the right
side of the key cabinet. Make sure all three
cables are in good condition. Fasten the
keypad to the wall with your mounting
hardware.
3. Connect the electronic lock, light, and
switch connectors inside the key cabinet.
The ends of each connector are labeled.
4. Push extra cable lengths inside the main
Touch console and snap the cables into the
retaining clips on the inside of the cabinet.
This prevents contact with the key panels
during operation and protects the cables.
*wire colors may vary
HandyTrac Touch
User Guide
5