Table of Contents
Advertisement
Establishing Communications
The HandyTrac Touch system supports both wired and WiFi network connections.
Only one connection type is needed for communication.
Option 1: Wired Connection
1. An ethernet network cable can be connected
to the ethernet network port located at the
bottom-left of the system near the power
cord. An ethernet cable does not need to
be connected if you will be using a WiFi
connection.
2. Once powered on, the system will display the
main HandyTrac Touch system Time and Date
screen. (pictured below)
3. If the wired connection is not active, you will
receive a "No Network" popup notification.
You may need to contact your network
administrator if devices require approval.
4. You can test your connection by tapping the
HandyTrac logo on the display one time.
5. You should receive a notification that says
"Data Transfer was Successful."
HandyTrac Touch
User Guide
Ethernet Network Port
Note: Tapping on
"About" in the top
right corner will list
network connection
information.
*Advanced network options are
detailed on page 34
9
Advertisement
Table of Contents
