9. Make sure the protective film is removed
from the fingerprint reader.
11. The system will chime and notify of
a successful read and display the
fingerprint image.
Notes:
• It is recommend you test your fingerprint access by logging out of the HandyTrac
system and signing back in by placing your finger on the reader.
• Badges and PINs can still be used in the event a finger is cut or no longer reads properly.
• Fingerprints are removed when an employee is deactivated on the website.
• The fingerprint preview should display a well defined and even print.
• If you have shallow fingerprints, it is recommended you use a larger finger on a non-
dominant hand.
16
HandyTrac Touch
10. Place your finger on the reader.
12. Repeat until the system says the print is
successfully registered.
User Guide