Table of Contents
Advertisement
Installation of Second Cabinet (if applicable)
Install the included spacer on the outside of the Right-Hand cabinet (marked RH).
This will allow enough space for employees to comfortably scan keytags and also provide
protection for the electronic lock and light wiring.
Insert the spacer through outside wiring hole. Thread on the included nut on the inside
Opens to Left
(LH)
Mount the second cabinet the same as the first and feed the cables from the control box
through the spacer. Connect the wiring the same as the first cabinet and clip down wires.
HandyTrac recommends a "left-to-right" hardware mounting process.
6
HandyTrac Touch
to secure in place.
User Guide
Opens to Right
(RH)
Advertisement
Table of Contents
