Chapter 1: Set-Up - Ultratec Minicom IV User Manual

C H A P T E R
1
SET-UP
All you need to do to set up the Minicom IV is plug it in! You must
plug in the AC adapter for 24 hours to charge the batteries. After
the batteries are charged, you can leave the AC adapter plugged in
all the time unless you need to use the batteries
during a power outage or while traveling.
Be sure to pull the plastic tab out of the battery compartment on
the bottom of the Minicom IV before you plug in the AC adapter.
1. Place the
Minicom IV next
to a telephone.
2. Plug the AC
adapter cord into
the Minicom IV.
3. Plug the AC
adapter into a
wall outlet.
6 • S E T – U P