Table of Contents
Advertisement
1.3 System Features
The following table is an overview of the main features of the 1029UZ-TN20R25M server.
Motherboard
X11DPU-ZE+
Chassis
SC116UTS-R1K62P-T
CPU
Dual Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processors (in Socket P (LGA3647))
(Intel Xeon Processor Scalable Family). For the latest CPU/memory updates, refer to our website at
https://www.supermicro.com/en/products/motherboard/X11DPU-ZE+
Memory
Twenty-four slots for up to 6 TB of 3DS Load Reduced DIMM (3DS LRDIMM), 3DS Registered DIMM (3DS
RDIMM), or up to 3 TB of Load Reduced DIMM (LRDIMM) with speeds of up to 2933 MHz; support for Non-
Volatile DIMM (NVDIMM) and Intel Optane DC Persistent Memory (DCPMM)
Chipset
Intel C621
Expansion Slots
Two full height, full length PCIe x8 slots (One if more than 18 NVMe drives are installed)
Storage Drives
Twenty hot-swap 2.5" x 7 mm bays for NVMe; two of these are hybrid ports that can support SAS or SATA
Up to two M.2 SSDs:
One M.2 NVMe and one M.2 SATA3 via optional cable (CBL-SAST-0538)
Two M.2 NVMe on an optional add-on card AOC-SLG3-2M2
Power
Two 1600/1000 W redundant 80Plus Titanium level modules
Cooling
Eight 4-cm counter-rotating fans, two CPU heatsinks, two air shrouds to direct air flow
Input/Output
LAN: Two 25 G SFP28 Ethernet ports; one dedicated IPMI port
USB: Two USB 3.0 ports on the rear I/O panel (USB 0/1); two USB 2.0 ports on front; one USB 3.0 internal Type
A header
One COM port
One VGA port
Form Factor
1U rackmount; (WxHxD) 17.2 x 1.7 x 27.8 in. (437 x 43 x 706 mm)
System Features
9
Chapter 1: Introduction
Advertisement
Table of Contents
