Table of Contents
Advertisement
SuperServer 1029UZ-TN20R25M User's Manual
Non-critical threshold
State [Normal]
Alarm enabled state
Use this setting to establish the non-critical threshold alarm. Choices are 1 and 0.
Sensor Type [Latched dirty shutdown count]
Value <6>
Sensor Type [Power on time]
Value <7172661 S>
Sensor Type [Up time]
Value <345287 S>
Sensor Type [Power cycles]
Value <1783>
Sensor Type [FW error count]
Value <8>
Sensor Type [Unlatched dirty shutdown count]
Value <138>
Modify non-critical thresholds
Controller temperature [C] 98
Media temperature [C]
Percentage remaining [%] 50
Apply changes
Press <Enter> to apply changes.
Update firmware
Specify the firmware image to load on the DIMMs on the next system restart and select
Update.
Current firmware version: 01.00.00.5127
Selected firmware version:
File:
Press <Enter> and type in the file path relative to the root directory of the device
containing the new firmware image file, such as "\firmware\newFirmware.bin".
50
82
None
110
Advertisement
Table of Contents
