Supermicro SuperServer 1029UZ-TN20R25M User Manual page 91

VMD Config for PStack1
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the item "Intel VMD for Volume Management Device" above is set to Enable,
the following items will be dislayed:
RSC-UN4-88 NVME1/2/3/4 VMD
(Available when the device is detected by the system)
Select Enable to use the Intel Volume Management Device Technology for this spe-
cific root port. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Select Enable to enable hot plug support for PCIe root ports 2A~2D. The options
are Disable and Enable.
VMD Config for PStack2
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the item "Intel VMD for Volume Management Device" above is set to Enable,
the following items will be dislayed:
RSC-UN4-88 SLOT2/1 VMD
(Available when the device is detected by the system)
Select Enable to use the Intel Volume Management Device Technology for this spe-
cific root port. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Select Enable to enable hot plug support for PCIe root ports 3A~3D. This will allow
the user to replace the components without shutting down the system. The options
are Disable and Enable.
IIO-PCIE Express Global Options
PCI-E Completion Timeout Disable
Select Enable to enable PCI-E Completion Timeout support for electric tuning. The op-
tions are Yes, No, and Per-Port.
South Bridge
The following South Bridge information will display:
•
USB Module Version
•
USB Devices
91
Chapter 6: BIOS