Table of Contents
Advertisement
Staged firmware version: N/A
Update
Press <Enter> to update firmware.
Configure security
Specify the security settings on ALL the DIMMs.
State: [Disabled]
Shows current state [Disabled, Frozen]
Enable security
Use this feature to enable security by entering a new passphrase. Press <Enter> to type
in a new passphrase with at least one character.
Secure erase
Use this feature to erase all persistent data. The options are Yes and No
Freeze lock
Use this feature to prevent further lock state changes until the next reboot.
Configure data policy
Specify the data policy settings on ALL the DIMMs.
First fast refresh state: Disabled or Enabled
Depending on the settings of the following feature, Enable/Disable first fast refresh,
[Disabled] or [Enabled] will be displayed.
Enable/Disable first fast refresh
Use this feature to enable/disable the feature above, First fast refresh state.
Regions
Use this submenu to configure and display regions.
Current configuration
Region ID1
Region ID: 0x0001
DIMM ID:
0x1011, 0x1021
111
Chapter 6: BIOS
Advertisement
Table of Contents
