Table of Contents
Advertisement
View Indoor/Add-On Sensor Readings
The weather station displays the current indoor temperature and humidity readings,
by default.
If the weather station is being used with additional sensors (see Expand the
System), toggle between indoor readings and each sensor's readings by pressing
and releasing the "
In auto-cycle mode, the display will automatically cycle through indoor and each
sensor's data. Auto-cycle mode can be activated by pressing and releasing the
"
" or "
" buttons until the "
The Sensor Indicator is used to determine which add-on sensor readings you are
viewing. For example, if the Sensor Indicator is displaying "A", the readings are
being transmitted from the sensor with the A-B-C switch set to "A".
PC Connect
PC Connect works with PCs to provide access to your Weather Center data in the
following ways:
• Data File: The display logs (or stores) data so that you can download it to a
CSV (comma separated values) data file on your PC.
• Web Browser or Smartphone: Monitor sensor data remotely using AcuRite's
free AcuRite online software, or from a mobile device using the free AcuRite
app, available from the iOS App Store or Google Play Store.
•
Weather Underground: This weather station is compatible for streaming data
to the Weather Underground Personal Weather Station Network. For more
information, navigate to: www.acurite.com > Support > Downloads
Download the Software
The PC Connect software is available online as a free download. A manual (PDF) is
included with the software download.
Before setting up the PC Connect software, verify that the display
is ON with the power adapter plugged in. Next, connect
the mini-USB (small end of the cable) into the USB port
on the display, located inside the battery compartment.
1
Download PC Connect software to your computer by visiting:
www.acurite.com > Support > Downloads
2
Open the file that was downloaded in step 1 and follow the on-screen
instructions to install the software.
3
After PC Connect is installed on the computer, the initial configuration will
begin automatically. Select where to save weather data downloaded from the
display. By default, this will create a folder named "AcuRite Weather Station"
in the Documents folder.
4
When prompted by the software to plug in the display, connect the USB
(larger end of the cable) into a USB port on the computer.
PC Connect is installed and ready for use.
Follow the instructions within the PC Connect app to complete setup and
begin using the software.
" or "
" buttons.
" indicator appears.
13
(PC)
Advertisement
Table of Contents
