Table of Contents
Advertisement
Installation Guide
Package contents
Your U.S. Robotics 56K PC Card Modem package contains the following items:
• U.S. Robotics 56K PC Card Modem
• RJ-11 phone cord (model USR0756-XJ only)
• RJ-11 jack-to-PC card connector cable (model USR0756-CB only)
• Quick Installation Guide
• Installation CD-ROM, which contains software and a User Guide for use
with your new modem
What you will need
You will need the following to install your U.S. Robotics 56K PC Card Modem:
• Notebook computer with an empty PC card slot
• Analog telephone line
Caution:
The U.S. Robotics 56K PC Card Modem requires a standard
analog telephone line. Do not connect your modem to a digital
telephone line. Digital lines are commonly used in office buildings and
hotels. If you are unsure whether your line is analog or digital, ask your
network administrator, building management, or your local telephone
company.
Before You Begin: Preparing for installation
Note:
U.S. Robotics recommends uninstalling any other modems that
are installed in your system and unplugging all telephone cords
connected to these modems. Refer to your previous modem's
documentation for instructions.
Write down your new modem's serial number, which is located on the white bar
code sticker on the modem and on the modem's box, in the space below. If you
ever need to call our Technical Support department, you will need the serial
number and the model number to receive assistance. If you need to get
assistance or download drivers from the Web site, you will need the product ID.
Model Number
0756
Product ID
USR0756-XJ
USR0756-CB
Serial Number
3
Advertisement
Table of Contents
