Power Connection - iCoolsport 5 Series Owner's Manual

Power Connection

Next connect the chiller to the mains power. You must make absolutely sure that you do not connect
your Compact machine to the wrong voltage or this will cause serious damage not covered under
warranty. Please check the voltage on the name plate above the power IN socket - it is either a 220 volt
model or a 110 volt model.
Power Connection
Compacts must be connected to the voltage marked on
the machine, /!\ they are NOT multi-voltage and using a
different voltage may cause severe damage. Please avoid the
use of long extension cords as they may result in voltage drops
that may trigger the inbuilt under voltage safety system.
Your Compact must be connected to standard AC power
capable of providing at least 13 Amps in countries with a
220v supply, and 26 Amps in countries with a 110v supply.
The Compacts require much less power than this for normal
Compact Series 4
operation, however they need more power for up to a minute
each time they start up and this must be allowed for.
All AC power outlets used must have an earth connection that
complies with your local electrical safety regulations.
1. Connect MAIN POWER
Plug the MAIN POWER to the top socket. You must use the
correct voltage shown above the socket.
Voltage
220 Volts
Ethernet
14
On
Off
2. Connect WATER PUMP
Plug the WATER PUMP to the bottom socket. If not using the
Compact Series 4
water pump provided, do not use pumps exceeding 1,000 w.
If your model is 220V, please follow connections shown below.
Voltage
220 Volts
Ethernet
Main Power Switch
Press T to test Safety Function
If your model is 110V, please follow connections shown below
for 110V for the International Marlin Pump suppied.
Compact Series 4
Voltage
220 Volts
On
Off
Ethernet
On
Off
Main Power Switch
Press T to test Safety Function