Assembly Connection - iCoolsport 5 Series Owner's Manual

Assembly Connection

The first step is to connect the water hoses between your chiller, your water pump and your pool.
Compact chillers have quick connect fittings that are compatible with the same fittings on all
iCoolSport pools Range. In this case you only need what is supplied in your kit.
If you wish to connect your machine to your own pool or bath tub we can supply special plumbing
devices that can add the convenience of these same quick connectors to your own pool ot tub.
1. Connecting the water hoses
to your Compact
Connect your hose set to your Compact by folowing these
diagrams and matching the colours of the connectors as
shown.
To connect the water fittings , line up the white marks and
twist clockwise 1/4 of a turn to lock them.
Compact
12
COOL
Connector colours may vary.
RED fittings may be replaced by LIGHT GREEN fittings.
Just make sure the colours match up as shown.
2. Connecting the water hoses
to your water circulation pump
Use the shortest length of hose supplied with the RED
connectors to join the water inlet on the bottom of the chiller
to the top (outlet) connection of the water pump as shown
below.
The longer length of hose with RED connectors is used to
join the bottom connection of the pump (water inlet) to the
bottom connection of the pool. This allows the pump to suck
water from the bottom of the pool and feed it to the chiller.
NOTE: Your pump may not look exactly like the one below but
the connections and water flow will be the same.
PUMP