Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 76

Hide thumbs Also See for Palmcorder MultiCam PV-DV203:

Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).

• "CONNECT WITH PC" and "STORAGE" appears in the EVF or the LCD monitor.

• The "Found New Hardware _screen of Windows is displayed.

• For extended use, the AC Adaptor should be used as a power source.

If USB Cable is disconnected while computer is on, error message may appear. In such a

case click [OK] and close the dialog box. By following the steps you can disconnect the

cable safely.

[ This screen is an example (Windows 2000) ]

Double-click the _

icon in the task

tray.

Select [USB Storage Device

Controller]* and click [Stop].

Verify [USB Storage Device

Controller]* is selected and click

[OK].

Click [OK].

• You can safely disconnect the cable.

If you are using Windows Me, [USB

Disk] will be displayed.

• Some OS, such as Windows 98SE, may

not show the icon indication that you may

safely disconnect in task tray. (OS may be

set not to show) After the [ACCESS]

display disappears from the EVF or LCD

monitor you may disconnect the USB

Cable.