Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 50

lll'J_ I |! I I,+'£ _+ L _t_. _.-,+.
-Cautions for the :Memory Card
• While Memory Card data is being read do not remove it, turn Off the power+ or subject
unit to vibrations aridlY< s hocks.
• Do not leave the Memory Card in a place with high temperature, a place exposed to
direct sunlight, or a piece where electromagnetic waves and static electricity can be
generated.
• Electromagnetic waves, static eiectrldr_, maffunction of the Digital Video Palmcerder or
of the Memory Card itee}f could ease the data recorded on it. To prevent the loss of
picture data we recommend that you make a backup copy on the computer.
• Do not bend or drop the Memory Card as this could damage it or the captured
contents+
• Do not touch the connecter on the rear edge of the Memory Card with your f_ngers and
take care that no dirt, dust or water enters it,
• De not affix other labels to the Memory Card face or back as Card insertion/removal
may become impossible.
"You can record still images from a
cassette tape to a Memory Card.
4PHOTOSHOT_
2POWER --
-Before you begin-
+
Connect the Palmce_der to a power
source. (pp+ _5, _6)
• Sat POWER te OFF before inse_ting a
Memory Card, (p+ 14)
Repeat steps I and 2 on page 49.
Set POWER to VCR.
Press IP (PLAY} to start playback of
the cassette tape. And then, press
I I (PAUSE) tO select an image.
Press PHOTOSHOT to record the
desired image to the Memory Card.
- When using this feature, the REC Mode
will always be set to NORMAL (640 x
460).
• Even if Playback Digital Effects (MIRROR,
MOSAIC, SEPIA_ I_3N) have been used,
• these effects do not affect the recording,
Multi-Picture cannot be recorded. {p+ 38)
- Whe_ PHOTOSHOT is pressed in
PLAY er SLOW mode, the screen
, goes to STILL mode,
To playback the images of the
. Memory Card, see page 61,
When Variable Speed Search is
done (p. 35}, this feature cannot be
used.
Repeat steps 3+4 to record another
image to the Memory Card.
5O