Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 62

i Before you begin
Insert a recorded tape. (p. 12) ]
* PHOTOVU: You can transfer Still images
from your Palmcorder tape to a PC.
MPEG4 Movie Messenger
TM
System:
You can transfer Motion images from your
Palmcorder tape to a PC.
Set Palmeorder POWER to VCR.
I _[_[_[_[_[_[_[_[_[_
:l--
....
Connect the Palmcorder to your PC
using the USB Cable (supplied) or
DV Interface Cable (i.LINK) (not
supplied). (pp. 60_ 61_ 72)
Click on "Start," "(All) Programs,"
"Panasonic," "MPEG4
MovieMessenger System 1.01 ," then
"MovieMessenger."
"PHOTOVU/MPEG4 MovieMessenger
System 1.01" is opened.
Refer to Help on program for information
about application operations and Error
messages.
While PHOTOVU/MPEG4 Movie Messenger
TM
System is running,
do not perform the following operations...
The PC system may become unstable.
• Change the screen area or color pallet in the Display Properties window.
• Turn the Palmcorder power switch ON or OFF while connecting the Palmcorder to your
PC using the USB Cable or DV Interface Cable (i.LINK).
• Change the Palmcorder power switch (VCPJCAMERA).
• You must first close the application.
• Connest/disconnect the DV Interface Cable (i.LINK).
• Connect/disconnect the USB Cable.
62