Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 32

Id L';_k_LOI'_L_J_ lILiJ.IJll
im1.:-J_w,J.iJ]LWJHl[._1 _'1
You can also use the LCD monitor to
play back your recording.
90°
2OPEN
3
SEARCH
Before you begin
• Connect the Palmcorder to a power
source. (pp. 15, 16)
• Insert a recorded cassette.
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to the
VCR position.
Use OPEN tab on underside of the
LCD monitor to unlock and swing open.
Press .<,4 (REWIND/SEARCH) to
rewind the tape.
Press I_ (PLAY) to start playback.
Press • (STOP) to stop playback.
• When the tape reaches its beginning
during few}rid or rewind search, it will
stop automatically.
• When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
• Using the LCD monitor reduces battery
operating time.
• You can place the Palmcorder on a table,
etc. for viewing. Rotate the LCD Monitor
180 ° and swing it up against the
Palmcorder body as shown.
You can connect earphones (not supplied)
to the PHONE Jack.
PHONE Jack
32