Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 114

WARNING Indication (pp. 100, 101)
The warning displays appear in the
EVF and the LCD monitor.
Counter/Time Code
The indication switches as shown
below when the desired "C. DISPLAY"
mode is selected from the menu.
(Menu OSD: pp. 109, 111)
Linear Time Counter Memory Counter
Time Code
Memory Counter M 0:00.00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00.00 during audio
dub, fast forward, or rewind.
IMPORTANT NOTE:
• Display must be set to ALL for MF, AE,
W.BALANCE or BACK LIGHT indications
to be displayed on the EVF or LCD Panel
when selected.
• C.RESET does not work when C. DISPLAY
is set to T.CODE.
Tape Mode Indications
REC Recording.
PHOTO PhotoShot recording.
PAUSE Paused during recording.
E> Playback.
II Still.
I[> Slow (forward).
<31 Slow (reverse).
lid Frame Advance (forward).
<311
Frame Advance (reverse).
R [> Repeat Playback.
CHK Recording Check.
FF Fast forward.
REW Rewind.
D{;> FF Search.
REW Search.
BLANK Blank Search.
SEARCH Index Search.
Time Code 0h00m00s00f _ MAGICPIX Indication (p. 41
)
The Palmcorder calculates and displays
exactly where you are on any tape in terms This display appears when MAGIC
of hours, minutes, seconds, and frames PIX is pressed.
(30 frames = 1 second).
• This display cannot be reset.