Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 28

Auto White Balance ("AWB") automatically
maintains optimum color balance in most
/ighling cenditier_s_ However, when using
Digital Functions, etc., you may get better
results by using the manual adjustment.
3, 4, A,
JOG KEY
1
POWER--
Set POWER to CAMERA.
3
4
Press AUTO/MANUAL so that the
"MNL" indication appears in the EVF
or the LCD monitor.
Press JOG KEY repeatedly until
"AWB" appears in the EVF or LCD
monitor.
Rotate JOG KEY to select ether
modes. (See mode chartat/eft.)
• Press AUTO/MANUAL to cancel the
setting.
AWB
_o?
Automatiasl/y maintains optimum
color balance in most I;ghting
conditions.
When the source illumination is a
halogen lamp.
When shooting outdoors on a
sunny day.
The White Balance setting that
was previously set manually.
• When ZOOM is set to 10X or
higher, Wh}te Be}once cannot be
adjusted.
28
* For manual White Balance
adjustment:
A. Rotate JOG KEY to select "_I.Z'.
B. Poirr[ the Palmeorder at a white
object (full-aoresn) and hold JOG
KEY down until "_==Z' i ndication stops
flashing.
• If "L_" indication flashes when the
Palmcerder is turned on, the previous
manual White Balance setting is in
effect.
In the following cases, the "_Z"
indication flashes:
• The flashing indicates that the
previously adjusted White Balance
setting is still kept. This setting will be
kept until White Balance isadjusted
again.
• Correct White Balance may not be
attainable manually in poor lighting
conditions.
• DISPLAY (Menu OSD: p. 109) must be
set to ALL for MF, AE, W.BALANCE,
HIGH SPEED SHUTTER, or IRIS to be
displayed on the LCD or EVF.
,, While "GAIN UP _ or "MAGICPIX _ ie
displayed on the LCD or EVF, Manual
White Balance is inoperable.